COVER 3890689 - Caterpillar

Illustration 1 g00586205
(1) Torque for the nut ... 136 14 N m (100 10 lb ft) (2) Torque for two nuts ... 136 14 N m (100 10 lb ft)Lubricate lip seal (3) with the lubricant that is being sealed.Adjustment procedure for the left pedal
Illustration 2 g00586240
(4) Torque for the jam nut ... 8 3 N m (70 27 lb in)Use the adjusting lever (5) in order to adjust the distance between the pedal and the floor (A). The distance (A) is equal to 83.0 mm (3.27 inches)..
Illustration 3 g00586244
In order to assemble sensor (6), rotate lever (5) so that surface (B) is parallel with surface (C). Install the sensor (6) and install the shaft. Rotate lever (5) so that surface (B) rests on bumper (7) .Adjustment procedure for the right pedal
Illustration 4 g00586444
Adjust the position of plate (8) so that switch assembly (9) is activated. The switch assembly (9) should be activated when the brake pedal is depressed 4.5 1.5 mm (0.18 0.06 inch).