3905226 COVER GP-CONSOLE Caterpillar parts
Rating:
Alternative (cross code) number:
CA3905226
390-5226
3905226
CA3905226
390-5226
3905226
Number on catalog scheme:
For full view, you need register
Information:
Removal Procedure
The Power Train Electric Drive System and the Accessory Power System will contain hazardous voltage levels during machine operation and for a period of time after machine shutdown.Do not remove any covers that will expose energized electrical components while the engine is operating. Do not remove any covers that will expose the energized electrical components while the components remain energized following an engine shutdown.Do not perform any type of electrical maintenance on the orange hazardous voltage conductors, the power train components or the accessory power system components while the engine is operating.Do not perform any type of electrical maintenance on the orange hazardous voltage conductors, the power train components or the accessory power system components while the components remain energized following an engine shutdown.Always perform the safe shutdown and de-energizing procedure before performing electrical service on the Power Train Electric Drive System or the Accessory Power System.Failure to follow these instructions could result in personal injury or death.
The two top compartments on the front of the Inverter Cabinet contain low voltage control components. All of the other compartments in the cabinet contain high voltage components. The "Electrical Shutdown and Voltage Discharge" procedure must be performed before any of the high voltage compartments are entered.
Prepare the machine for maintenance. Refer to Operation and Maintenance Manual, "Prepare the Machine for Maintenance".
Shutdown and de-energizing the machine. Refer to Operation and Maintenance Manual, "Electrical Shutdown and Voltage Discharge".
Illustration 1 g03795821
Remove cover assembly (1).
Illustration 2 g06361170Note: Note the current direction that is indicated on the top of current sensor (4) for installation purposes.
Disconnect harness assembly (2).
Remove bolts (4) and washers (5). Remove bolts (7) and washers (8). Remove bus bar (9).
Remove screws (3). Remove sensor assembly (6).Installation Procedure
Install sensor assembly (6) in the reverse order of removal.
Tighten screws (3) to a torque of 3.5 0.5 N m (31 4 lb in).
Tighten bolts (4) and bolts (7) to a torque of 27.5 N m (243 lb in).
The Power Train Electric Drive System and the Accessory Power System will contain hazardous voltage levels during machine operation and for a period of time after machine shutdown.Do not remove any covers that will expose energized electrical components while the engine is operating. Do not remove any covers that will expose the energized electrical components while the components remain energized following an engine shutdown.Do not perform any type of electrical maintenance on the orange hazardous voltage conductors, the power train components or the accessory power system components while the engine is operating.Do not perform any type of electrical maintenance on the orange hazardous voltage conductors, the power train components or the accessory power system components while the components remain energized following an engine shutdown.Always perform the safe shutdown and de-energizing procedure before performing electrical service on the Power Train Electric Drive System or the Accessory Power System.Failure to follow these instructions could result in personal injury or death.
The two top compartments on the front of the Inverter Cabinet contain low voltage control components. All of the other compartments in the cabinet contain high voltage components. The "Electrical Shutdown and Voltage Discharge" procedure must be performed before any of the high voltage compartments are entered.
Prepare the machine for maintenance. Refer to Operation and Maintenance Manual, "Prepare the Machine for Maintenance".
Shutdown and de-energizing the machine. Refer to Operation and Maintenance Manual, "Electrical Shutdown and Voltage Discharge".
Illustration 1 g03795821
Remove cover assembly (1).
Illustration 2 g06361170Note: Note the current direction that is indicated on the top of current sensor (4) for installation purposes.
Disconnect harness assembly (2).
Remove bolts (4) and washers (5). Remove bolts (7) and washers (8). Remove bus bar (9).
Remove screws (3). Remove sensor assembly (6).Installation Procedure
Install sensor assembly (6) in the reverse order of removal.
Tighten screws (3) to a torque of 3.5 0.5 N m (31 4 lb in).
Tighten bolts (4) and bolts (7) to a torque of 27.5 N m (243 lb in).
Caterpillar SIS machinery equipment:
Caterpillar SIS
CB64B, CB66B & CB68B Vibratory Compactor B6600001-UP (MACHINE) POWERED BY C4.4 Engine »
390-5226
COVER GP-CONSOLE
CB68B, CB66B, CB64B Vibratory Compactor 47500001-UP (MACHINE) POWERED BY C4.4 Engine »
390-5226
COVER GP-CONSOLE
CB13 Asphalt Compactor PWP00001-UP (MACHINE) POWERED BY C4.4B Engine »
390-5226
COVER GP-CONSOLE
CB15 Asphalt Compactor M9400001-UP (MACHINE) POWERED BY C4.4B Engine »
390-5226
COVER GP-CONSOLE
CB16 Asphalt Compactor HP500001-UP (MACHINE) POWERED BY C4.4B Engine »
390-5226
COVER GP-CONSOLE
CB13 Asphalt Compactor LP900001-UP (MACHINE) POWERED BY C4.4B Engine »
390-5226
COVER GP-CONSOLE
CB16 Asphalt Compactor KHC00001-UP (MACHINE) POWERED BY C4.4B Engine »
390-5226
COVER GP-CONSOLE
CB15 Asphalt Compactor NPB00001-UP (MACHINE) POWERED BY C4.4B Engine »
390-5226
COVER GP-CONSOLE
Caterpillar parts catalog:
Parts cover Caterpillar catalog:
3869923
COVER
Caterpillar
Caterpillar
3865877
COVER
Caterpillar
Caterpillar
3831243
COVER GP-REAR
Caterpillar
Caterpillar
3829765
COVER GP-PLATFORM
Caterpillar
Caterpillar
3793060
COVER AS
Caterpillar
Caterpillar
3637419
COVER AS
Caterpillar
Caterpillar
3923573
COVER
Caterpillar
Caterpillar
3917078
COVER
Caterpillar
Caterpillar
3910923
COVER AS
Caterpillar
Caterpillar
3910922
COVER GP-GENERATOR
Caterpillar
Caterpillar
3910209
COVER GP-CAB
Caterpillar
Caterpillar
3905227
COVER GP-CONSOLE
Caterpillar
Caterpillar