COVER GP-CAMSHAFT 3934969 - Caterpillar

GRAPHIC CONTROLNO="g02992966" @@@-->
Illustration 4 g02992966
Table 5
TTT and Pipelayers Torque Converter Output Flange - Bearing Diameters
Part No. Bearing Dia.
mm (in.) Datum A
mm (in.)
1T-0238 110.010 0.008 mm (4.3311 0.0003 inch) 74.613 0.018 mm (2.9375 0.0007 inch)
1T-0254 89.995 0.008 mm (3.5431 0.0003 inch) 65.088 0.013 mm (2.5625 0.0005 inch)
1T-0422 65.011 0.008 mm (2.5595 0.0003 inch) 47.625 0.013 mm (1.8750 0.0005 inch)
1T-1846 65.011 0.008 mm (2.5595 0.0003 inch) 47.625 0.013 mm (1.8750 0.0005 inch)
1T-2072 65.011 0.008 mm (2.5595 0.0003 inch) 47.625 0.013 mm (1.8750 0.0005 inch)
1T-2087 65.011 0.008 mm (2.5595 0.0003 inch) 47.625 0.013 mm (1.8750 0.0005 inch)
7G-2953 109.977 0.010 mm (4.3300 0.0004 inch) 79.228 0.025 mm (3.1190 0.0010 inch)
7G-5270
106-7097 110.010 0.008 mm (4.3310 0.0003 inch) 74.613 0.018 mm (2.9380 0.0007 inch)
121-0023 109.977 0.010 mm (4.3300 0.0004 inch) 79.228 0.025 mm (3.1190 0.0010 inch)
207-5294 70.010 0.008 mm (2.7563 0.0003 inch) 50.621 0.025 mm (1.9930 0.001 inch) Note: Total indicator run-out (TIR) of the bearing diameter to datum A is 0.076 mm (0.003 inch).
Illustration 5 g02993297
Illustration 6 g02993298
Table 6
TTT and Pipelayers Torque Converter Output Flange - Thrust Face
Part No. Datum (A) mm
(in.) Length (B) mm
(in.) Length (C) mm
(in.) Dia. (D) mm
(in.) Dia. (E) mm
(in.)
1T-0238 74.613 0.018 mm (2.9375 0.0007 inch) 10.693 0.013 mm (0.4210 0.0050 inch) 19.558 0.080 mm (0.7700 0.0030 inch) 93.5 mm (3.68 inch) 139.7 mm (5.50 inch)
1T-0254 65.088 0.013 mm (2.5625 0.0005 inch) 10.693 0.013 mm (0.4210 0.0050 inch) 19.558 0.080 mm (.7700 0.0030 inch) 88.9 mm (3.50 inch) 123.7 mm (4.87 inch)
1T-0422 47.625 0.013 mm (1.8750 0.0005 inch) 13.741 0.013 mm (0.5410 0.0050 inch) 19.050 0.013 mm (0.7500 0.0050 inch) 63.5 mm (2.50 inch) 88.9 mm (3.50 inch)
1T-2087 47.625 0.013 mm (1.8750 0.0005 inch) 13.741 0.013 mm (0.5410 0.0050 inch) 19.050 0.013 mm (0.7500 0.0050 inch) 63.5 mm (2.50 inch) 88.9 mm (3.50 inch) Note: Total indicator run-out (TIR) of the thrust face to datum (A) is 0.076 mm (0.003 inch).