COVER 3S4372 - Caterpillar

Illustration 1 g01330529
Typical exampleInstall the handle assembly with the governor in the LOW IDLE position. Install the handle assembly forward of the vertical to the value of angle (A). ... 12 degrees 30 minutes (1) Shaft ... The shaft must bottom out against the plug. Tighten an additional three turns. (2) Handle As 4W-2542 Spring is inside the handle assembly. Length under test force ... 53.3 mm (2.10 inch) Test force ... 53 N (12 lb) Free length after test ... 98.0 mm (3.86 inch) Outside diameter ... 15.24 mm (0.600 inch) (3) 2H-0210 Spring The 2H-0210 Spring is only for the 4N-3831 Governor Control Gp . Length under test force ... 26.2 mm (1.03 inch) Test force ... 28 N (6 lb) Free length after test ... 119.9 mm (4.72 inch) Outside diameter ... 19.1 mm (0.75 inch)