COVER AS 4165875 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Loctite Gasket Sealant No.2 -
B - Loctite C5-A Copper Anti-Seize -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Use a new gasket to install the aftercooler.
Illustration 1 g00746356Note: Apply Tooling (A) to the threads of the bottom bolts before installation.
Install gasket (9) on the engine. Install aftercooler (10). Install bolts (8).
Tighten clamp (6) and tighten clamp (7).
Illustration 2 g00746355
Tighten clamp (4).
Connect coupling (5).
Illustration 3 g00508837
Illustration 4 g00508835Note: Apply Tooling (B) to the threads of the exhaust elbow bolts.
Install exhaust elbow (1) and exhaust pipe (3). Install bolts (2).
Fill the cooling system. Refer to Operation and Maintenance Manual, SEBU7098, "Cooling System Level - Check" for the correct procedure.