COVER GP 4316795 - Caterpillar

Illustration 1 g06180895
Table 1
Specification for 397-0736 Rear Gear Gp
Item Qty Part Specification Description
1 2 127-4628 Idler Gear As After installation, bore of 125-9751 Bushing in the idler gear assembly is 81.060 0.010 mm (3.1913 0.0004 inch).
Installation depth of the bushing is 1.00 0.25 mm (0.049 0.010 inch).
2 2 101-1368 Thrust Washer Thickness of the new thrust washer is 1.90 0.10 mm (0.075 0.004 inch).
3 1 386-2938 Idler Gear As After installation, bore of 101-1372 Bushing in the gear assembly is 75.060 0.010 mm (2.9551 0.0004 inch).
Installation depth of the bushing is 1.5 0.5 mm (0.06 0.02 inch).
4 4 8M-2530 Bolt Torque to 140 10 N m (103 7 lb ft).
5 1 101-1366 Gear Shaft Diameter is 74.990 0.010 mm (2.9524 0.0004 inch).
6 4 1B-4367 Bolt Torque to 240 20 N m (177 15 lb ft).
7 2 8S-2331 Bolt Torque to 240 20 N m (177 15 lb ft).
8 1 101-1365 Thrust Plate Thickness of the new thrust plate is 6.35 0.25 mm (0.250 0.010 inch).
9 1 399-7361 Crankshaft Gear The mark on the gear assembly (3) must be in alignment with the mark on the crankshaft gear (9).
10 2 101-1367 Idler Shaft Diameter is 81.000 0.010 mm (3.1890 0.0004 inch).