COVER-TORQUE CONVERTER 4328350 - Caterpillar

When you pave, do not force excessive material onto the cut-off shoes. This will increase the drag and put exessive strain on the end gate. Damage to the end gate may occur.
Unlock the cut-off shoes from the end gates before you raise the screed for travel. This will prevent the cut-off shoes from contacting the auger conveyor.
Illustration 1 g00685234
Select the proper shoe for the desired width. Raise the end gate.
Place the cut off shoe on the end gate for the amount of reduction that is desired.
Lower the end gate (1) onto the cut off shoe.
Install the stud (3) in the slotted hole (4) on the end gate. Install the bolt (2) in the hole on the end gate.