AVSPARE.COM
parts catalog

COVER GP-OIL FILLER 4415692 - Caterpillar



4415692 COVER GP-OIL FILLER Caterpillar parts C2.2 COVER
Rating:
83
Alternative (cross code) number:
CA4415692
441-5692
4415692
Caterpillar 4415692 COVER GP-OIL FILLER

Buy COVER GP-OIL FILLER 4415692 Caterpillar genuine, new aftermarket tractor parts with delivery
GENERATOR SET,

Compatible equipment models: 4415692:

GENERATOR SET  C2.2   Caterpillar
Number on catalog scheme:
 
  For full view, you need register

Information:


Quantity Part Number Description
Not ApplicableACTION REQUIRED
Clean the area that will be welded of all oil,grease, paint, dirt, and mill scale.Weld a 20mm fillet weld to both sides of eachrear lift eye over the top of existing weld.See the attached procedure.OWNER NOTIFICATION
U.S. and Canadian owners will receive the attachedOwner Notification.SERVICE CLAIM ALLOWANCES
Caterpillar Dealer Suggested Customer Suggested
Parts Labor Hrs. Parts Labor Hrs. Parts Labor Hrs.
100% 4 0 0 0 0
This is a 4-hour job.
U.S. and Canadian Dealers Only - Eligibledealers may enter a Type 2 SIMS ReportPARTS DISPOSITION
Handle the parts in accordance with your WarrantyBulletin on warranty parts handling.
MAKE EVERY EFFORT TO COMPLETE THIS PROGRAMAS SOON AS POSSIBLE.
Attach. (1-Owner Notification)
(2-Rework Procedure)COPY OF OWNER NOTIFICATION FOR U.S. AND CANADIAN OWNERS
XYZ Corporation
3240 Arrow Drive
Anywhere, YZ 99999SAFETY - PRODUCT IMPROVEMENT PROGRAM FORINCREASING THE WELD SIZE ON THE REAR LIFT EYES OF CERTAIN 5110B EXCAVATORSMODELS INVOLVED - 5110B ExcavatorsDear Caterpillar Product Owner:The weld around the rear lift eyes may notbe adequate or may have poor fusion on the products listed below. Failureof this weld during lifting of the machine could allow the machine to falland result in personal injury or death.Contact your local Caterpillar dealer immediatelyto schedule this service. The dealer will advise you of the time requiredto complete this service. Please refer the dealer to their Service Letterdated September 4, 2001 when scheduling this service. You will not be chargedfor the service performed.We regret the inconvenience this may causeyou, but urge you to have this service performed for your added safetyand satisfaction.Caterpillar Inc.Identification #(s)Attached to September 4, 2001 Service Letter
REWORK PROCEDUREWeld Specifications and ParametersQualifications of WeldersAll of the welders must be qualified in ShieldedMetal Arc Welding (SMAW) or Flux Cored Arc Welding (FCAW) for groove welding.All of the welders must be qualified in Shielded Metal Arc Welding (SMAW)or Flux Cored Arc Welding (FCAW) for fillet welding. Refer to the AmericanNational Standards Institute (ANSI/American Welding Society (AWS) D1.1.Prior to welding, the process must have been used by the welders duringthe last six months. Welding qualifications must be documented and weldingqualifications must be current.Safety InformationPersonal breathing protection should be wornby the welders. Personal breathing protection will prevent fumes from enteringthe respiratory system of the person that is welding. Use a 1U8088 Respiratorfor respiratory protection.Weld Specifications and InformationThe following welding process is the preferredprocess:Flux cored arc welding (FCAW) Use 35 +/- 5cubic feet per hour of the shielding gas that is recommended by the manufacturer.The FCAW process is called the AWS Class E71T-1 process. Use an electrodewith a 1.5875 mm (0.0625 inch) diameter.The following welding processes are acceptablesubstitutes for the preferred process:Gas metal arc welding (GMAW) Use 35 +/- 5 cubicfeet per hour of shielding gas (75% argon and 25% carbon dioxide). ThisAWS Class ER70S-3 process can be run on Lincoln L-50, National StandardNS101 or Hobart HB-25 equipment.Flux cored arc welding (FCAW) Use 35 +/- 5cubic feet per hour of the shielding gas that is recommended by the manufacturer.The FCAW process is called the AWS Class E71T-1 process. Use an electrodewith a 1.3208 mm (0.052 inch) diameter.Use the Flux Cored Arc Welding (FCAW) withE71T-1 (ANSI/A5.20) welding electrode and the specified

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
DE9.5E3 Generator Set TYB00001-UP POWERED BY C1.1 Engine
DE18E3/DE22E3 Generator Set TY200001-UP POWERED BY C2.2 Engine
DE18E3/DE22E3 Generator Set SMF00001-UP POWERED BY C2.2 Engine
C2.2 Generator Set GBE00001-UP
C2.2 Industrial Engine G7L00001-UP
C2.2 DE18E3/DE22E2 Generator Set GBY00001-UP


Parts cover Caterpillar catalog:

1536848 COVER
216, 216B, 226B, 232B, 242B, 247B, 257B, 3003, 301.5, 3011C, 3013, 3013C, 3014, 302.5, 3024, 3024C, 303.5, 304.5, 902, C0.5, C0.7, C1.1, C1.5, C1.6, C2.2, CB-14, CB-214D, CB-214E, CB-334E
2389289 COVER-VALVE
226B, 232B, 242B, 247B, 257B, 3024, 3024C, C2.2
3081869 COVER
216B, 216B3, 226B, 226B3, 232B, 242B, 247B, 247B3, 257B, 3013C, 3024C, AP-255E, BB-621C, C1.1, C1.5, C1.6, C2.2, CB-22, CB-334E, CB-34, CB22B, CB24B, CB32B, CB34B, CB34B XW, CC24B, CC34B
2972996 COVER-HOUSING
216B, 216B3, 226B, 226B3, 232B, 242B, 247B, 247B3, 257B, 3013, 3013C, 3014, 302.5, 3024, 3024C, 303.5, 304.5, 902, AP-255E, BB-621C, C1.1, C1.5, C2.2, CB-214D, CB-214E, CB-22, CB-334D, CB-334E, CB-335...
3839577 COVER-VALVE
226B, 226B3, 232B, 242B, 247B, 247B3, 257B, 3024, 3024C, C2.2
3667248 COVER-CYLINDER HEAD
226B, 226B3, 232B, 242B, 247B, 247B3, 257B, C2.2
2775665 COVER
C2.2, C4.4, C6.6
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.