COVER AS 4506355 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tooling Part Number Description Qty
A 185-3630 Strap Wrench Assembly 1
Illustration 1 g01000608
Ensure that O-ring seals (1) are in position in engine oil filter base (2).
Use four bolts in order to fasten engine oil filter base (2) to the engine.
Illustration 2 g01000609
Illustration 3 g01000610
Apply a thin layer of engine oil on the O-ring seal of inlet tube assembly (3) and outlet tube assembly (4).
Use a new gasket and install inlet tube assembly (3).
Install clip (5).
Use a new gasket and install outlet tube (4).
Illustration 4 g01000611
Apply a thin layer of engine oil on gasket seal (6).
Install oil filter (7) until gasket seal (6) makes contact with the engine oil filter base.
Use Tooling (A) in order to tighten oil filter (7).