COVER-DIFFERENTIAL 4790970 - Caterpillar

Illustration 2 g06127098
Table 2
Item Qty Part Specification Description
4 1 165-4929 Plug As Torque to 220 33 N m (162 24 lb ft).
5 16 1D-4608 Bolt Torque to 475 60 N m (350 44 lb ft).
Illustration 3 g06127102
Section D-D
Table 3
Item Qty Part Specification Description
6 1 449-5364 Bushing Bore before assembly is 331.19 0.15 mm (13.040 0.006 inch)
7 1 449-5363 Bushing Bore before assembly is 331.19 0.15 mm (13.040 0.006 inch)
8 12 320-6751 Self-Locking Bolt Torque to 475 60 N m (350 44 lb ft).
9 - - Before assembly, apply 6V-5765 Sealant between mating surfaces.
10 16 1D-4626 Bolt Torque to 750 90 N m (553 66 lb ft).
E - - Projection of the spring pin from the surface of the rear housing 19 2 mm (0.7 0.1 inch).
Illustration 4 g06127112
Section C-C
Table 4
Item Qty Part Specification Description
11 8 9X-8896 Bolt Torque to 1175 150 N m (867 111 lb ft).
12 60 2J-3507 Full Nut Torque to 1175 150 N m (867 111 lb ft).
H - 104-7006 Hollow Dowel Projection of the four 104-7006 Hollow Dowel in each of the axle flanges 22.5 1.0 mm (0.89 0.04 inch)