COVER 4941760 - Caterpillar

Introduction
This Special Instruction provides the procedure in order to install the new water lines clip for the G3516B and G3520B Petroleum Engines. Refer to Table 1 for a list of new parts to install the water lines clip.Required Parts
Table 1
Qty    Part    
1     0S-1591 Bolt    
2     2P-4437 Clip    
1     4P-7233 Grommet    
2     5M-2894 Hard Washer    
1     6W-2928 Boss    
1     9S-8752 Full Nut    
1     353-7956 Grommet    Installing the New Water Lines Clip
Illustration 1 g03422810
np (1) 6W-2928 Boss (2) 0S-1591 Bolt (3) 5M-2894 Hard Washer (4) 9S-8752 Full Nut (5) 353-7956 Grommet (6) 4P-7233 Grommet (7) 2P-4437 Clip
Locate the original water lines clip.
Remove the original water line clip and hardware.
Install grommet (5) around the boost sensing line.Note: Grommet (5) is install around the smaller line.
Install grommet (6) around the water line.
Install two clips (7) around grommets (5) and (6) use one boss (1), one bolt (2), two washers (3), and one nut (4) .