COVER A. 4M9178 - Caterpillar

Illustration 16 g01176605
Connect hose (38). Connect heater hoses (35) and (37). Install exhaust pipe assembly (36).
Illustration 17 g01176535
Install pump assembly (33) and two bolts (34).
Illustration 18 g01176571
Position compressor (29) and install bolts (30). Connect bracket (32). Connect harness assemblies (31).
Illustration 19 g01176533
Connect harness assemblies (27) and (28). Connect clips (25) and (26).
Illustration 20 g01176522
Install pump assembly (24) and bolts (23). Connect fuel hose assemblies (21) and (22).
Illustration 21 g01176477
Install pump assembly (20) and bolts (19) .
Illustration 22 g01176476
Position harness assembly (6) and connect clip (18). Connect harness assembly (15). Connect fuel hose assemblies (16) and (17). Install dipstick (14).
Illustration 23 g01176271
Connect battery cable assemblies (11). Connect harness assembly (13). Connect harness assembly (6). Install transmission oil filler tube (12) .
Illustration 24 g01176275
Position harness assemblies (6) and cable assembly (7). Install clip (9). Connect harness assembly (10) .
Illustration 25 g01176274
Connect cable assembly (7) and harness assembly (6). Install clip (8) .Note: Cable assembly (7) is part of harness assembly (6) .
Illustration 26 g01176273
Install panel (5) that is located on the right side of the machine. Tighten bolts (4) .
Illustration 27 g01176303
Install bolts (3) .
Illustration 28 g01176296
Illustration 29 g01176299
Install bolt (2). Install cover (1) .
Fill the engine oil. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change".
Fill the transmission oil. Refer to Operation and Maintenance Manual, "Torque Converter and Transmission Oil - Change".
Fill the engine coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Install the belt. Refer to Operation and Maintenance Manual, "Belt - Inspect/Adjust/Replace".
Raise the crankcase guards.
Close the engine hood.End By: Install the aftercooler, the fan, and the gear motor. Refer to Disassembly and Assembly, "Aftercooler, Fan and Gear Motor - Remove".