COVER 4M9213 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     1V-8760         1    
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00541644
Use tooling (A) in order to remove case drain filter (1) .
Use tooling (A) in order to remove charge oil filter (2) .Installation Procedure
Illustration 2 g00541644
Install case drain filter (1). Tighten the filter by 3/4 turn after gasket contact.
Install charge oil filter (2). Tighten the filter by 3/4 turn after gasket contact.