COVER 4N3840 - Caterpillar

Single Camera System
Ensure that the display is not in the "Standby" mode.Refer to Operation and Maintenance Manual, "Display Description" for information on the operation of the buttons for the display.Note: If the single camera system can be placed in manual mode, notify your Caterpillar service personnel.Note: If the display does a sequence to the next group of stored settings, this may alter the appearance of the view or the orientation of the camera view.Adjustment for Brightness
Illustration 1 g06100258
Keypad for the display
(1) Camera Status LED Lights
(2) Button Status LED Lights
(3) Light Sensor
(4) Camera Selection
(5) Automatic Brightness
(5) Contrast Button
(7) Brightness Button
(8) Camera Scroll / Menu Back Function
(9) Decrease Adjustment Button
(10) Increase Adjustment Button
(11) Standby Function / Enter / Power ON/OFF ButtonTo adjust the brightness, perform the following procedure:
Press the button for adjusting the brightness (7) to enable the adjustment for brightness. The red LED light that is above the button and to the right of the button for adjusting the brightness will illuminate to indicate that you have entered the mode for adjusting the brightness.
Press the "Minus" button (9) or the "Plus" button (10) to adjust the brightness level.
Press any other button on the display to exit the mode for adjusting the brightness. The red LED light that is above the button and to the right of button for adjusting the brightness will turn OFF.The display may appear white in an area that is lighted if the following conditions exist:
The level for brightness is high.
The automatic brightness is not enabled.Adjustment for Contrast
To adjust the contrast, perform the following procedure:
Press the button for adjusting the contrast (6) to enable adjustment for contrast. The red LED light that is above the button and to the right of the button for adjusting the contrast will illuminate to indicate that you have entered the mode for adjusting the contrast.
Press the "Minus" button (9) or the "Plus" button (10) to adjust the contrast level.
Press any other button on the display to exit the mode for adjusting the contrast. The red LED light that is above the button and to the right of the button for adjusting the contrast will turn OFF.Automatic Brightness ON/OFF
To enable the option for automatic brightness, perform the following procedure:
Press the button for automatic brightness (5). The red LED light that is above the button and to the right of the button for automatic brightness will illuminate to indicate that the option for auto brightness or the dimming option is enabled.
Press the button for automatic brightness again to disable the option for automatic brightness. The red LED light that is above the button and to the right of the button for automatic brightness will turn off to indicate that the option for automatic brightness or the dimming option is disabled.Standby ON/OFF
To enable the Standby ON/OFF option, perform the following procedure:
Press the standby button (11) to enable standby. The red LED light that is above the button and to the right of the button for the standby option will illuminate to indicate that standby