COVER GROUP 4S5830 - Caterpillar

(1) Tighten the bolts that hold adapter assembly (2) to the engine to a torque of ... 115 15 N m (85 11 lb.ft.)(2) Adapter assembly.(3) Torque for hub nut ... 40 N m (30 lb.ft.) plus 60° to 90° more Bend lock against flat of nut to hold nut in position.(4) Torque for bolt that holds the lock in place ... 26 N m (21 lb.ft.) Torque for the bolt that holds the clutch lever on the shaft ... 100 N m (75 lb.ft.)A force of 555 N (125 lb.) must be necessary to engage the clutch. The force must be at 90° to the clutch lever and 345 mm (13.6 in.) from the center of the clutch shaft.(5) End clearance for shaft ... 0.10 to 0.18 mm (.004 to .007 in.)(6) Thickness of clutch plate (new) ... 11.00 to 11.25 mm (.433 to .443 in.)(7) Torque for two bolts that hold the yoke to the shaft ... 51 N m (38 lb.ft.)(8) Torque for two bolts that hold the collar assembly together ... 40 N m (30 lb.ft.)(3412)
(1) Tighten the bolts that hold the adapter to the crankshaft to a torque of ... 200 25 N m (150 20 lb.ft.)(2) Tighten the bolts that hold the clutch ring to the adapter to a torque of ... 135 13 N m (100 10 lb.ft.)(3) Adapter assembly; tighten the bolts that hold the adapter assembly to the engine to a torque of ... 115 15 N m (85 11 lb.ft.)(4) Tighten nut to a torque of ... 750 70 N m (550 50 lb.ft.)(5) Tighten hub nut to a torque of ... 40 N m (30 lb.ft.) plus 60 to 90° more Bend lock againt flat of nut to hold nut in position.(6) End clearance for shaft ... 0.08 to 0.25 mm (.003 to .010 in.) A force(F) of 605 65 N (136 15 lb.) must be necessary to engage the SINGLE PLATE CLUTCH. The force must be at 90° to the clutch lever and 345 mm (13.6 in.) from the center of the lever shaft.