COVER 5027348 - Caterpillar

Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
On machines listed above, hose clamps in multiple locations on the machine may be loose or incorrectly positioned. The result may be leaks occurring with these hoses.
Table 1
List of Affected Parts
Qty Part
1 298-0530 Muffler Clamp
298-1657 Clamp
298-7977 Hose Clamp
298-7980 Hose Clamp
299-0309 Clamp
303-8599 Clamp
309-2982 Clamp
309-4001 Clamp
323-7265 Clamp
331-3890 Clamp
332-1989 Clamp
333-0736 Clamp
343-5908 V Band Clamp
367-2071 Clamp
421-3800 Hose Clamp
457-1255 Clamp
457-9914 Clamp
465-2827 Clamp
475-9854 Clamp
512-5636 T Bolt Clamp
8T-4984 Hose Clamp Solution
Tighten any loose hose clamps up to the specified torque. Refer to Specifications, SENR3130, "Torque Specifications".