COVER-PAINTED 5200408 - Caterpillar

Location of possible interference between end gate and wear plate.A method to eliminate the interference is to remove the 1/2" by 1/2" key stock from the end gates and install the two-piece front wear plates described in the reference article. An alternative to ordering all the components shown in the reference article is to order only the 7X6451 and 7X6452 Left And Right Front Wear Plates respectively. Remove the existing front wear plate and install the 7X6451 and 7X6452 Left and Right Wear Plates respectively on the outer ends of the screed. Trim the existing front wear plate to fit the remaining space on the screed and install it.