COVER AS 5251179 - Caterpillar

Conveyor System
Illustration 1 g00745135
Apply parking control (3) .
Set maximum speed potentiometer (1) to half speed.
Set speed range switch (4) to PAVE.
Set throttle control (5) to maximum rpm.
Push propel control (2) completely forward.
Illustration 2 g00745138
Set conveyor auto/manual controls (6) to AUTO.
Set auger control switches (8) to AUTO. The augers should be operating at full rpm.
Illustration 3 g00745152
If the machine is equipped with the feeder control sensor paddles, rotate the paddles outward. This ensures that the augers will slow at some point in the range. If the machine is equipped with sonic sensors, position the sensors in order to stop the augers at the desired mix height. When you position the sonic sensors, set mix height dials (9) to one-half. To adjust the head of material, use the mix height dial.Vibratory System
Illustration 4 g00800556
Turn vibratory switch (7) on the operator's console to the ON position.
Illustration 5 g00745157
Turn vibratory switch (10) in the right screed control box to the ON position. The vibrators should be operating.
Illustration 6 g00745160
The speed of the vibrators can be adjusted with adjusting knob (11) on the vibratory manifold.
Illustration 7 g00800573
Return propel lever (2) to NEUTRAL.