COVER 5H2736 - Caterpillar

Illustration 1 g02624416
Table 1
Specification for 332-4938 Hoe Stick Gp
Item Qty Part Specification Description
All bores must be free of paint. Use 5P-0960 Grease Cartridge in order to coat all bores for the pins, the bushings , the bucket, and the cylinder pin bores.
1 - - The stick cylinder must be assembled in order to orient the grease zerk, as shown in Illustration 1
2 As required, use the following shims to adjust a maximum lateral clearance of 1.6 mm (0.06 inch).
Mount the steel shim in order to be located at the boom side.
1 113-2127 Shim Thickness is 0.5 mm (0.02 inch).
2 093-0084 Shim Thickness is 1.0 mm (0.04 inch).
1 093-0116 Shim Thickness is 2.0 mm (0.08 inch).
3 1 148-3386 Pin As Diameter is 89.850 0.025 mm (3.5374 0.0010 inch).
4 1 130-4360 Pin As Diameter is 99.850 0.040 mm (3.9311 0.0016 inch).
5 As required, use the following shims to adjust a maximum lateral clearance of 1.6 mm (0.06 inch).
Mount the steel shim in order to be located at the boom side.
1 133-2427 Shim Thickness is 0.5 mm (0.02 inch).
2 093-0090 Shim Thickness is 1.0 mm (0.04 inch).
1 093-0122 Shim Thickness is 2.0 mm (0.08 inch).
6 2 9X-4599 Lip Type Seal Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
7 2 166-1494 Lip Type Seal Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
8 2 9X-4598 Lip Type Seal Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
9 2 228-5621 Bushing(1) Bore before assembly is 120.259 0.040 mm (4.7346 0.0016 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
10 2 462-2005 Bushing(1) Bore before assembly is 80.181 0.020 mm (3.1567 0.0008 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
11 2 228-5619 Bushing(1) Bore before assembly is 110.222 0.040 mm (4.3394 0.0016 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
(1) Install the bushing in the bore so that the part number of the bushing is facing outward.