COVER 5I5688 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Description     Qty    
A     138-7573     Link Bracket     2    
Illustration 1 g01151744
Place swing drive (11) into position on suitable cribbing. The weight of swing drive (11) is approximately 509 kg (1123 lb).
Use Tooling (A) and a suitable lifting device in order to place swing motor (6) into position on swing drive (11) . The weight of swing motor is approximately 80 kg (177 lb). Take note of the alignment mark on the swing drive. Install swing motor (6) . Install bolts (13) .
Illustration 2 g01151839
Attach Tooling (A) and a suitable lifting device to swing motor (6) . Install swing motor (6 ) and swing drive (11) into position. The weight of swing drive (11) and swing motor (6) is approximately 590 kg (1300 lb).
Illustration 3 g01151843
Install mounting bolts (12) . Tighten mounting bolts (12) to a torque of 900 100 N m (664 74 lb ft).
Move bracket (8) into position. Install bolts (9) . Connect hose assembly (10) . Move harness assembly (7) into position.
Illustration 4 g01149504
Connect hose assemblies (5) , (4) , (3) , (2) , and (1) to the swing motor.
Fill the hydraulic oil tank. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change".