5I7587 COVER Caterpillar parts
318C, 319C, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321C, 321D LCR, 323D L, 323D LN, 323D SA
Rating:
Alternative (cross code) number:
CA5I7587
5I-7587
5I7587
CA5I7587
5I-7587
5I7587
Weight: 2 pounds 0 kg.
EXCAVATOR, MOBILE HYD POWER UNIT,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
£479.00
21 May 2018
Gowegroup: Gowegroup
GOWE TURBO for TURBO TD06H-16M 49179-02300 49179 02300 5I-8018 5I8018 Turbocharger For Caterpillar CAT Excavator 320C 320B 320L 3066 3066T S6KT
TURBO TD06H-16M 49179-02300 49179 02300 5I-8018 5I8018 Turbine Turbocharger For Caterpillar CAT 320C 320L Engine S6KT NEW; Turbo model: TD06H-16M; Part Number: 49179-02300; OEM Number: 5I8018 518018 5I-8018 2797860, 279-7860; Application: For Caterpillar CAT Earth Moving 320C L 320B L 320L Excavator 2001- 320B, 320B L, 320B LL, 320B LU, 320B N, 320B U, 320C, 320D LRR, 320D RR, 321B, 321C, 320C, 320C L, 320D, 320D L, 323D L, 323D LN, 323D S || Engine: S6KT 3066T 3066; Turbo Model: TD06H-16M/12; Part Number: 49179-02300; Previous Part Number: 4917902300; OE number: 5I8018, 5I-8018, 2797860, 279-7860; Description: For Caterpillar Earth Moving 320C L, 320BL-Excavator; CHRA: 49179-08600 (5I7589); Engine: 3066T; Displacement: 6300 ccm || Fuel Diesel; KW 143; Can Use 316375 Schwitzer S2A; Machine Engine: 3066, C6.4; Excavator: 320B, 320B L, 320B LL, 320B LU, 320B N, 320B U, 320C, 320D LRR, 320D RR, 321B, 321C, 320C, 320C L, 320D, 320D L, 323D L, 323D LN, 323D S; S/N MAB1-UP, PAB1-UP, MAE1-UP, GAD224-UP, 7JK1-UP, 7JK60000-UP, MAE1-UP, 7JK55000-99999, 7JK1-UP, 7JK60000-99999; Bearing Housing: 49179-20300 (1352359) || Turbine Wheel: 49179-30220 (1352357) (Ind. 58.8 mm, Exd. 68. mm, 12 Blades)(58.8/68 mm); Comp. Wheel: 49185-40700 (1352360) (Ind. 48.04 mm, Exd. 68.01 mm, Back plate: 49168-22500 (1352351); Heat shield Number: 49168-18900 (1352346); Repair Kit: 49178-81100 ; Turbine Housing: AR 12; Turbine Housing: 49179-17820 (5I8041); Compressor Cover: 443213-0020 (5I7587) || Gasket (turbine inlet): 409039-0000 (210022-0000, 2405022) (5I7742); Gasket (oil outlet): 210317 (5I7689) (Paper); Applications: For Caterpillar Earth Moving 320C Excavator 3066T 2001-
TURBO TD06H-16M 49179-02300 49179 02300 5I-8018 5I8018 Turbine Turbocharger For Caterpillar CAT 320C 320L Engine S6KT NEW; Turbo model: TD06H-16M; Part Number: 49179-02300; OEM Number: 5I8018 518018 5I-8018 2797860, 279-7860; Application: For Caterpillar CAT Earth Moving 320C L 320B L 320L Excavator 2001- 320B, 320B L, 320B LL, 320B LU, 320B N, 320B U, 320C, 320D LRR, 320D RR, 321B, 321C, 320C, 320C L, 320D, 320D L, 323D L, 323D LN, 323D S || Engine: S6KT 3066T 3066; Turbo Model: TD06H-16M/12; Part Number: 49179-02300; Previous Part Number: 4917902300; OE number: 5I8018, 5I-8018, 2797860, 279-7860; Description: For Caterpillar Earth Moving 320C L, 320BL-Excavator; CHRA: 49179-08600 (5I7589); Engine: 3066T; Displacement: 6300 ccm || Fuel Diesel; KW 143; Can Use 316375 Schwitzer S2A; Machine Engine: 3066, C6.4; Excavator: 320B, 320B L, 320B LL, 320B LU, 320B N, 320B U, 320C, 320D LRR, 320D RR, 321B, 321C, 320C, 320C L, 320D, 320D L, 323D L, 323D LN, 323D S; S/N MAB1-UP, PAB1-UP, MAE1-UP, GAD224-UP, 7JK1-UP, 7JK60000-UP, MAE1-UP, 7JK55000-99999, 7JK1-UP, 7JK60000-99999; Bearing Housing: 49179-20300 (1352359) || Turbine Wheel: 49179-30220 (1352357) (Ind. 58.8 mm, Exd. 68. mm, 12 Blades)(58.8/68 mm); Comp. Wheel: 49185-40700 (1352360) (Ind. 48.04 mm, Exd. 68.01 mm, Back plate: 49168-22500 (1352351); Heat shield Number: 49168-18900 (1352346); Repair Kit: 49178-81100 ; Turbine Housing: AR 12; Turbine Housing: 49179-17820 (5I8041); Compressor Cover: 443213-0020 (5I7587) || Gasket (turbine inlet): 409039-0000 (210022-0000, 2405022) (5I7742); Gasket (oil outlet): 210317 (5I7689) (Paper); Applications: For Caterpillar Earth Moving 320C Excavator 3066T 2001-
Number on catalog scheme:
2
For full view, you need register
Compatible equipment models: 5I7587:
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
B FT2712 Guide Stud 2
C 7M-7456 Bearing Mount Compound 1
Always wear protective gloves when handling parts that have been heated.
Raise the temperature of the ring gear to a maximum temperature of 315 °C (599 °F). Position the ring gear with the part number toward the crankshaft. Install the ring gear on the flywheel. Allow the ring gear to cool. Use a soft hammer in order to seat the ring gear against the shoulder of the flywheel.
Illustration 1 g01010803
Install Tooling (A) on flywheel (2). Fasten a suitable lifting device to flywheel (2). The weight of the flywheel is approximately 41 kg (90 lb).
Place flywheel (2) on the crankshaft. Slide the flywheel over Tooling (B).
Apply Tooling (C) to the threads of bolts (1).
Install six of the eight bolts (1). Remove Tooling (B) from the end of the crankshaft and replace with the two remaining bolts. Tighten the bolts evenly to a torque of 300 40 N m (221 30 lb ft).
Check the flywheel runout. Refer to Testing and Adjusting, "Flywheel - Inspect" for the correct procedure.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
B FT2712 Guide Stud 2
C 7M-7456 Bearing Mount Compound 1
Always wear protective gloves when handling parts that have been heated.
Raise the temperature of the ring gear to a maximum temperature of 315 °C (599 °F). Position the ring gear with the part number toward the crankshaft. Install the ring gear on the flywheel. Allow the ring gear to cool. Use a soft hammer in order to seat the ring gear against the shoulder of the flywheel.
Illustration 1 g01010803
Install Tooling (A) on flywheel (2). Fasten a suitable lifting device to flywheel (2). The weight of the flywheel is approximately 41 kg (90 lb).
Place flywheel (2) on the crankshaft. Slide the flywheel over Tooling (B).
Apply Tooling (C) to the threads of bolts (1).
Install six of the eight bolts (1). Remove Tooling (B) from the end of the crankshaft and replace with the two remaining bolts. Tighten the bolts evenly to a torque of 300 40 N m (221 30 lb ft).
Check the flywheel runout. Refer to Testing and Adjusting, "Flywheel - Inspect" for the correct procedure.
Cat SIS web machinery list:
Parts cover Caterpillar catalog:
120H ES, 12H ES, 140H ES, 143H, 14H NA, 160H ES, 163H NA, 16H NA, 216, 216B, 216B3, 226B, 226B3, 232B, 236, 236B, 236B3, 236D, 242B, 242B3, 242D, 246C, 246D, 247B, 247B3, 252B, 252B3, 256C, 257B, 257B...
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H, 16H, 30/30, 311D LRR, 312D, 312D L, 314D CR, 314D LCR, 315D L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR...
311, 311B, 311C, 312, 312B, 315, 315B L, 315C, 315D L, 316E L, 317, 317B LN, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320C L, 320D, 320D FM, 320D GC, 320D L...
311, 311B, 312, 312B, 313D2 LGP, 315, 315B, 315B FM L, 315B L, 315C, 315D L, 316E L, 317, 317B LN, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320B L, 320C, 320C L, ...
315C, 315D L, 318B, 318C, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 3...
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 313D, 313D2, 315C, 315D L, 318C, 318D L, 318D2 L, 319D L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 3...
311C, 311D LRR, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315D L, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN...
312D, 320B, 320C, 323D LN, 323D SA, 323E L, 325, 325 L, 325 LN, 325B, 325B L, 325C, 325D, 325D L, 325D MH, 328D LCR, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 330, 330 FM L, 330 L, 330B L, 330C, 3...
311, 311B, 312, 312B, 320, 320 L, 320B, 320B FM LL, 320N
320B, 320C, 320C FM
320C, 320C FM, 320D, 320D FM, 320D FM RR, 322C, 322C FM, 323D LN, 323D SA, 323E L, 324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 325C, 325C FM, 325D, 325D L, 325D MH, 326D L, 329D, 329D L, 329D LN, 32...
320 L, 320N
1252981
COVER AS
318C, 319C, 320B, 320B L, 320C, 320C FM, 320C L, 320D, 320D LRR, 321B, 321C, 323D L, 323D LN
318C, 319C, 320B, 320B L, 320C, 320C FM, 320C L, 320D, 320D LRR, 321B, 321C, 323D L, 323D LN
318C, 319C, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321C, 321D LCR, 323D L, 323D LN, 323D SA
1680582
COVER
318C, 319C, 320B, 320C, 320C FM, 320C L, 320D, 320D FM RR, 320D LRR, 320D RR, 321C, 321D LCR, 323D L, 323D LN
318C, 319C, 320B, 320C, 320C FM, 320C L, 320D, 320D FM RR, 320D LRR, 320D RR, 321C, 321D LCR, 323D L, 323D LN
5I8001
COVER
318C, 319C, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D LRR, 321C
318C, 319C, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D LRR, 321C
2070149
COVER
308D, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 321C, 321D LCR, 328D LCR
308D, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 321C, 321D LCR, 328D LCR
2187799
COVER AS
314C
314C
2487739
COVER AS
312C, 312C L, 315C, 318C, 319C
312C, 312C L, 315C, 318C, 319C
307D, 308D, 312C, 312C L, 315C, 318C, 319C, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 321C, 321D LCR, 322C, 322C FM, 324D FM, 324D FM LL, 325C, 325C FM, 325D FM, 325D FM LL, 328D LCR, 330C, 33...
2242929
COVER AS
312C L, 315C, 318C, 320C, 322C, 325C, 330C, 330C L
312C L, 315C, 318C, 320C, 322C, 325C, 330C, 330C L
2553162
COVER AS
318C, 319C
318C, 319C
1939737
COVER AS
318C, 319C
318C, 319C
0859832
COVER
318C, 319C, 320 L, 320B, 320B FM LL, 320C, 320C FM, 320C L, 320D, 320D LRR, 321C, 323D L, 323D LN, E200B
318C, 319C, 320 L, 320B, 320B FM LL, 320C, 320C FM, 320C L, 320D, 320D LRR, 321C, 323D L, 323D LN, E200B