5I8762 COVER Caterpillar parts
311, 311B, 312, 312B, 312B L, 315, 315B, 315B FM L, 315B L, 317, 317B LN, 318B
Rating:
Alternative (cross code) number:
CA5I8762
5I-8762
5I8762
CA5I8762
5I-8762
5I8762
Weight: 2 pounds 1 kg.
EXCAVATOR,
Compatible equipment models: 5I8762:
Number on catalog scheme:
22
For full view, you need register
Information:
Removal Procedure
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01250304
Remove bolts (1). Remove sheet (2) .
Illustration 2 g01250305
Turn valve (3) to the OFF position.
Illustration 3 g01250613
Open door (4) .
Illustration 4 g01250616
Disconnect hose assemblies (5) and (6). Position hose assemblies (5) and (6) aside.
Illustration 5 g01250618
Remove bolts (7). Remove fuel cooler (8) .Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 6 g01250618
Position fuel cooler (8). Install bolts (7) .
Illustration 7 g01250616
Connect hose assemblies (5) and (6).
Illustration 8 g01250613
Close door (4) .
Illustration 9 g01250305
Turn valve (3) to the ON position.
Illustration 10 g01250304
Position sheet (2). Install bolts (1) .
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01250304
Remove bolts (1). Remove sheet (2) .
Illustration 2 g01250305
Turn valve (3) to the OFF position.
Illustration 3 g01250613
Open door (4) .
Illustration 4 g01250616
Disconnect hose assemblies (5) and (6). Position hose assemblies (5) and (6) aside.
Illustration 5 g01250618
Remove bolts (7). Remove fuel cooler (8) .Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 6 g01250618
Position fuel cooler (8). Install bolts (7) .
Illustration 7 g01250616
Connect hose assemblies (5) and (6).
Illustration 8 g01250613
Close door (4) .
Illustration 9 g01250305
Turn valve (3) to the ON position.
Illustration 10 g01250304
Position sheet (2). Install bolts (1) .
Caterpillar parts catalog:
Parts cover Caterpillar catalog:
120G, 120H, 120K, 120K 2, 120M, 120M 2, 12G, 12H, 12K, 12M, 130G, 135H, 1390, 140G, 140H, 140K, 140K 2, 143H, 14H, 160G, 160H, 160K, 163H, 16H, 215, 215B, 2384C, 2484C, 24H, 24M, 2590, 30/30, 305.5, 3...
3054, 3056, 307, 312, 315, 317, 416B, 416C, 426C, 428B, 428C, 436C, 438C, 914G, AP-800C, BG-225B, CB-434B, CB-434C, CB-534B, CB-534C, CB-535B, CB-544, CB-545, CP-433C, CS-323C, CS-431C, IT14G, M312, M...
3054, 3054B, 3056, 3056E, 312B L, 312C, 315B L, 416C, 416D, 420D, 424D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 550B, 554, 560B, 564, 574B, 908, 924G, 924GZ, 930G, AP-655C, AP-800C, BB-7...
311, 311B, 311C, 312, 312B, 315, 315B L, 315C, 315D L, 316E L, 317, 317B LN, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320C L, 320D, 320D FM, 320D GC, 320D L...
311, 311B, 312, 312B, 313D2 LGP, 315, 315B, 315B FM L, 315B L, 315C, 315D L, 316E L, 317, 317B LN, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320B L, 320C, 320C L, ...
7Y5560
COVER
311, 312, 315, 320 L, 320N, 322, 322 LN, 325, 325 L, 325 LN, 330, 330 FM L, 330 L, 350, 375, 375 L, 5080
311, 312, 315, 320 L, 320N, 322, 322 LN, 325, 325 L, 325 LN, 330, 330 FM L, 330 L, 350, 375, 375 L, 5080
1111146
COVER
307, 311, 312, 320 L, 320N, 322 FM L, 325, 325 FM L, 330, 330 L
307, 311, 312, 320 L, 320N, 322 FM L, 325, 325 FM L, 330, 330 L
315C, 315D L, 318B, 318C, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 3...
312B, 315B, 315B FM L
5I8761
COVER-SEAL
311, 311B, 312, 312B, 312B L, 315, 315B, 315B FM L, 315B L, 317, 317B LN
311, 311B, 312, 312B, 312B L, 315, 315B, 315B FM L, 315B L, 317, 317B LN
1102544
COVER
312, 312B L, 315, 315B L, 317
312, 312B L, 315, 315B L, 317
7Y6007
COVER
311, 312, 315, 317, 318C, 319C, 320 L, 320C, 320C FM, 321C, 322, 322 FM L, 322C, 325, 325 L, 325 LN, 325C, 329E, 330C, 330C L, 336E, M313D, M315D
311, 312, 315, 317, 318C, 319C, 320 L, 320C, 320C FM, 321C, 322, 322 FM L, 322C, 325, 325 L, 325 LN, 325C, 329E, 330C, 330C L, 336E, M313D, M315D
7Y2158
COVER-CARRIER ROLLER
311, 311B, 311C, 311D LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313B, 313D, 313D2, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 323D LN, E110B, E120B
311, 311B, 311C, 311D LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313B, 313D, 313D2, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 323D LN, E110B, E120B
1025740
COVER
312
312
1025690
COVER AS
311, 312
311, 312
311, 311B, 312, 312B, 312B L, 313B, 315, 315B, 315B L, 317, 317B LN, 318B, 375
311, 311B, 312, 312B, 312B L, 313B, 315, 315B, 315B L, 317, 317B LN, 318B, 375
1418057
COVER
307, 312, 312B L, 315, 315B L, 317, 317B LN, 318B
307, 312, 312B L, 315, 315B L, 317, 317B LN, 318B
1020730
COVER
311, 311B, 312, 312B, 312B L, 315, 315B L, 317, 317B LN, 318B, 320C FM, 323D L, 325C, 325C L, 325D, 325D MH, 329D L, 330C, 330C L, 330C MH, 330D L, 330D MH, 336D L, M325D L MH, M325D MH, M330D
311, 311B, 312, 312B, 312B L, 315, 315B L, 317, 317B LN, 318B, 320C FM, 323D L, 325C, 325C L, 325D, 325D MH, 329D L, 330C, 330C L, 330C MH, 330D L, 330D MH, 336D L, M325D L MH, M325D MH, M330D
7Y4714
COVER AS
311, 312, 315, 317, 320 L, 320N, 322, 322 FM L, 322 LN, 325, 325 L, 325 LN, 330, 330 FM L
311, 312, 315, 317, 320 L, 320N, 322, 322 FM L, 322 LN, 325, 325 L, 325 LN, 330, 330 FM L
0931588
COVER
311, 312, 313B, 315, 317, 320 L, 320N, 322, 322 FM L, 322 LN, 325, 325 L, 325 LN, 330, 330 FM L, 350, 375, 375 L, 5080, 521B, 522B, E110, E110B, E120, E120B, E140, E180, E200B, E240, E240C, E300, E300...
311, 312, 313B, 315, 317, 320 L, 320N, 322, 322 FM L, 322 LN, 325, 325 L, 325 LN, 330, 330 FM L, 350, 375, 375 L, 5080, 521B, 522B, E110, E110B, E120, E120B, E140, E180, E200B, E240, E240C, E300, E300...