COVER (FUEL FILTER) 5M0593 - Caterpillar

Illustration 22 g00502215
Disconnect wire assembly (48) from starter (49) .
Illustration 23 g00502216
Remove the bolt and ground wire (50) from the starter.
Remove the nut and wire assembly (51) from the starter.
Illustration 24 g00502219
Remove the nut and wire (52). Disconnect wire (53) .
Illustration 25 g00502244
Disconnect two connectors (54) .
Unplug two wires (55) and (56) .
Illustration 26 g00502246
Disconnect connector (57) from the hydraulic pump.
Illustration 27 g00502247
Cut off the straps. Pull electrical wires (58) away from the engine.
Illustration 28 g00502250
Remove nut (59) and spring (60) from the throttle linkage.
Loosen nut (61) and remove throttle cable (62) from the engine.
Illustration 29 g00502283
Disconnect lines (63) and (64) from the piston pump.
Illustration 30 g00502303
Remove four bolts (65) and couplings (66) from the implement pump.
Remove lines (67) and (68) away from the engine.
Illustration 31 g00502313
Remove eight bolts (69), tube (70), and tube (71) from the implement pump.
Disconnect lines (72) and (73) from the implement pump.
Illustration 32 g00502318
Remove four bolts and washers (74) .
Remove two couplings (75) and line (76) away from the piston pump.
Disconnect lines (77), (78), and (79) .
Illustration 33 g00502319
Remove four bolts and washers (80) .
Remove two couplings (81) and line (82) from the piston pump.
Disconnect line (83) from the piston pump.
Illustration 34 g00502345
Illustration 35 g00502346
Use a suitable lifting device, as shown. Apply slight tension to the suitable device.
Remove three bolts and washers (84) from the engine.
Remove the engine from the machine. the weight of the engine and pumps is 590 kg (1300 lb).