COVER AS-FLYWHEEL CLUTCH 5S5712 - Caterpillar

Illustration 52 g01292326
Use two people to install clutch housing (28) . The weight of clutch housing (28) is approximately 39 kg (85 lb).
Install gear (27) .
Illustration 53 g01292325
Install seals (26) .
Illustration 54 g01292323
Install dowels (24) , piston (25) , and discs (21) . plate (22) , and springs (23) .
Illustration 55 g01292322
Lower the temperature of bearing race (20) and install bearing race (20) .
Install retaining ring (18) .
Use two people to install housing (19) . The weight of housing (19) is approximately 34 kg (75 lb).
Illustration 56 g01292321
Install seals (17) .
Illustration 57 g01294402
Install dowels (14) , piston (16) , and spring (15) .
Illustration 58 g01784953
Lower the temperature of retainer (11) and install retainer (11) .
Lower the temperature of bearing (10) and install bearing (10) .
Use Tooling (D) in order to install retaining ring (9) .
Illustration 59 g01292318
Install gear (6) on hub (8) .
Use Tooling (C) to install retaining ring (7) .
Illustration 60 g01292316
Install hub assembly (5) and bolts (4) on cage assembly (2) .
Illustration 61 g01294368
Install piston (16) , plates (13) and discs (12) to cage assembly (2) .
Use Tooling (K) to secure the assembly together.
Illustration 62 g01294369
Illustration 63 g01292315
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Use Tooling (A) , Tooling (K) and a suitable lifting device to install cage assembly (2) . The weight of cage assembly (2) is approximately 61 kg (135 lb).
Remove Tooling (K) and install bolts (3) .
Illustration 64 g01292314
Use Tooling (A) and a suitable lifting device to remove planetary (1) from Tooling (B) .End By: Install the transmission planetary. Refer to Disassembly and Assembly, "Transmission Planetary - Install".