COVER 6I8056 - Caterpillar

Table 1
24M Motor Grader
Engine C18 Acert Diesel Engine
RHX1-Up
Transmission Six Speeds Forward.
Three Speeds Reverse.
HKY1-Up
Approximate operating weight(1) 65840 kg (145152 lb)
Maximum length 16101.5 mm (52 ft 10 inch)
Width across front tires 4280.1 mm (14 ft 1 inch)
Height at top of ROPS 4382 mm (14 ft 4 inch)
(1) This weight includes a full fuel tank, a push plate, an autolube, an operator, a ROPS, a ripper, and a 24 foot blade.Intended Use
The 24M Motor Grader is an earthmoving machine. The 24M is classified as a grader described in "ISO 6165:2001". This is a self-propelled wheeled machine which has an adjustable blade positioned between the front and rear axles. This Motor Grader can also be fitted with a front mounted blade or a rear mounted ripper. This Motor Grader is intended for the following applications: use in grading, sloping, ditching, and scarifying of materials through a forward motion.Useful Life
The useful life of this machine is dependent upon many factors including the machine owner’s desire to rebuild the machine back to factory specifications. Consult your Cat dealer for assistance in calculating overall owning and operating costs required to determine the machines useful life. The following items are required to obtain an economical useful life of this machine:
Perform regular preventive maintenance procedures as described in the Operation and Maintenance Manual.
Perform machine inspections as described in the Operation and Maintenance Manual and correct any problems discovered.
Perform system testing as described in the Operation and Maintenance Manual and correct any problems discovered.
Ensure that machine application conditions comply with Caterpillar’s recommendations.
Ensure that the operating weight does not exceed limits set by manufacturer.Application/Configuration Restrictions
Maximum approved operating weight is 69335 kg (152857 lb).The cab structure is ROPS certified to ISO 3471:1994 for up to 69335 kg (152857 lb).Maximum drawbar pull is 285 kN (64071 lb)Parking brake holding capability on a grade is 20% grade.Service brake holding capability on a level surface.Use only in environments with nonexplosive gases.