COVER 6J2417 - Caterpillar

Rotation of the turbocharger without engine operation can result in damage to the turbocharger.Cover the exhaust opening or secure the rain cap in order to prevent the turbocharger from windmilling in transit.
Investigate the travel route for overpass clearances. Make sure that there is adequate clearance for the machine that is being transported. This is especially important for machines that are equipped with a ROPS, with a FOPS, with a cab, or with a canopy.Remove ice, snow, or other slippery material from the loading dock and from the truck bed before you load the machine onto the transport machine. Removing ice, snow, or other slippery material will help to prevent the machine from slipping in transit.Note: Obey all laws that govern the characteristics of a load (height, weight, width, and length). Observe all regulations that govern wide loads.Remove the ether starting aid cylinder, if equipped.When you move the machine to a colder climate, make sure that the cooling system has the proper antifreeze.Note: The machine shipping mode can be enabled through ET or the display. Shipping mode will lock out articulation and wheel lean commands.
Before you load the machine, chock the trailer wheels or the rail car wheels.
When the machine is positioned, make sure the front axle lean is in the locked position.
Remove the following items from the motor grader: tires, ripper, and moldboard.
Stop the engine.
Turn the start switch to the OFF position. Remove the start switch key.
Turn the battery disconnect switch to the OFF position. Remove the disconnect switch key.
Lock the door and the access covers. Attach any vandalism protection.
Secure the machine with tie-downs.Perform a walk-around inspection and measure the fluid levels in the various compartments.Travel at a moderate speed. Observe all speed limitations when you are roading the machine.Consult your Caterpillar dealer for shipping instructions for your machine.