6N7695 COVER-OIL PUMP Caterpillar parts
3408, 3408B, 3408C, 3412, 3412C, 3412D, 589, 631E, 637D, 637E, 639D, 651E, 657E, 769C, 771C, 772B, 773B, 775B, 834B, 836, 910, 988B, 988F, 990, 992C, 992D, D10N, D9L, D9R, PM-565, PR-1000, PR-450, PR-...
Rating:
Alternative (cross code) number:
CA6N7695
6N-7695
6N7695
CA6N7695
6N-7695
6N7695
Weight: 0.70 pounds 0 kg.
COLD PLANER, WHEEL TRACTOR,
Related part:
6N7695
COVER-OIL PMP-YM
4411564
CL
Compatible equipment models: 6N7695:
Number on catalog scheme:
5
For full view, you need register
Information:
Engine: 3606 (S/N: 8RB1-UP) 3608 (S/N: 6MC1-UP) 3612 (S/N: 9FR1-UP; 9RC1-UP) 3616 (S/N: 1FN1-UP; 1PD1-UP)Introduction
The rack position sensor works with the fuel injection control in order to interpret the position of the fuel rack. The rack position sensor produces a signal that represents the engine load. The signal can be used for different purposes. The signal may activate an indicator in order to display the percent of engine load to the operator. The signal can be routed to a controller in order to limit the load.The signal of the rack position sensor is delivered via a remote mounted amplifier. The wiring of the amplifier determines the type of signal that is produced. The amplifier can be wired in order to provide a signal of voltage or a signal of milliamperes.This Special Instruction describes assembly of the 4P-6989 Position Sensor and the 127-1020 Position Sensor . Instructions for wiring of the 132-7523 Rotary Amplifier are provided. The procedure for calibration of the amplifier and the rack position sensor is also included.Do not perform any procedure in this Special Instruction until you read this information and you understand this information.Assembly Procedure
Your governor actuator may be different from the illustrations. However, this procedure is suitable for use with any governor actuator that is supplied by Caterpillar.
Illustration 1 g00743716
Typical example for in-line engines (1) Lever for the fuel injection control (2) Fuel control rod
Illustration 2 g00755991
Typical example for vee engines (1) Lever for the fuel injection control (2) Fuel control rod
Install lever (1) onto the fuel injection control. Adjust fuel control rod (2) according to the Service Manual for the particular equipment.
Illustration 3 g00756327
Typical example for in-line enginesThe fuel control rod is not shown. (3) Lever for the rack position sensor (4) Bolt (5) Shaft of the rack position sensor
Illustration 4 g00756002
Typical example for vee engines (3) Lever for the rack position sensor (4) Bolt (5) Shaft of the
The rack position sensor works with the fuel injection control in order to interpret the position of the fuel rack. The rack position sensor produces a signal that represents the engine load. The signal can be used for different purposes. The signal may activate an indicator in order to display the percent of engine load to the operator. The signal can be routed to a controller in order to limit the load.The signal of the rack position sensor is delivered via a remote mounted amplifier. The wiring of the amplifier determines the type of signal that is produced. The amplifier can be wired in order to provide a signal of voltage or a signal of milliamperes.This Special Instruction describes assembly of the 4P-6989 Position Sensor and the 127-1020 Position Sensor . Instructions for wiring of the 132-7523 Rotary Amplifier are provided. The procedure for calibration of the amplifier and the rack position sensor is also included.Do not perform any procedure in this Special Instruction until you read this information and you understand this information.Assembly Procedure
Your governor actuator may be different from the illustrations. However, this procedure is suitable for use with any governor actuator that is supplied by Caterpillar.
Illustration 1 g00743716
Typical example for in-line engines (1) Lever for the fuel injection control (2) Fuel control rod
Illustration 2 g00755991
Typical example for vee engines (1) Lever for the fuel injection control (2) Fuel control rod
Install lever (1) onto the fuel injection control. Adjust fuel control rod (2) according to the Service Manual for the particular equipment.
Illustration 3 g00756327
Typical example for in-line enginesThe fuel control rod is not shown. (3) Lever for the rack position sensor (4) Bolt (5) Shaft of the rack position sensor
Illustration 4 g00756002
Typical example for vee engines (3) Lever for the rack position sensor (4) Bolt (5) Shaft of the
Cat SIS web machinery list:
Parts cover Caterpillar catalog:
24H, 583T, 587T, 854K, 992, 992K, 993K, D10N, D10R, D10T, D11R, D11T, D8R, D8T, D9L, PL83, PL87
515, 525, 621, 621E, 621F, 621G, 621H, 621K, 623E, 623F, 623G, 623H, 623K, 623K LRC, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 631C, 631E, 631G, 633C, 633E II, 637E, 637G, 657E, 657G, 966C, 977K, ...
910, 931B, 931C, AD30, AD40, AD45, AD45B, AD55, AD55B, AD60, AE40, CS-323C, D4D, R1300, R1300G, R1300G II, R1600, R1600G, R1600H, R1700 II, R1700G, R2900, R2900G, R3000H
D8L, D8N, D8R, D8R II, D8T, D9N, D9R, D9T
518, 528, 528B, 530B, 613C, 613C II, 613G, 725, 725C, 730, 730C, 769C, 773B, 916, 936, 950, 950B, 950B/950E, D250D, D250E, D250E II, D300B, D300D, D300E, D300E II, G936
5130B, 836, 966F II, 980G, D10R, D11R, D7R II, D8R, D8R II, D9R
824G, 824G II, 824H, 825G, 825G II, 825H, 826G, 826G II, 826H, 980C, 980F, 980F II, 980G, 980G II, 980H, 980K, 988B
992C, 992D, 994
825C, 826C, 834B, 988B, 988F, R2900, R2900G, R3000H
24H, 824B, 834B, 836, 980C, 980F, 980F II, 988B, 988F, 988F II, AD40, AE40, D10N, D10R, D8L, D9L, D9R, R1700 II, R1700G
24H, 24M, 770, 770G, 770G OEM, 772, 772B, 772G, 772G OEM, 773, 773B, 773D, 773E, 773F, 773G, 773G LRC, 773G OEM, 775B, 775D, 775E, 775F, 775G, 775G LRC, 775G OEM, 776C, 776D, 777, 777B, 777D, 777F, 77...
D10N, D10R, D10T, D9L, D9N, D9R
8N7854
COVER
3408, 3412
3408, 3412
8N7846
COVER AS-MOTOR
3306, 3408, 3412, G3306
3306, 3408, 3412, G3306
5N3910
COVER AS
3304, 3406, 3408, 3412
3304, 3406, 3408, 3412
3406, 3408, 3408B, 3408C, 3412, 3412C, 3412D, 589, 631E, 637E, 651E, 657E, 769C, 771C, 772B, 773B, 775B, 834B, 988B, 988F, 990, 992C, 992D, D10N, D8L, D9N, D9R, PM-565, PR-1000, PR-450C, PR-750B
1W4911
COVER
3304, 3306, 3406, 3408, 3412, G3306, G3408, G3412, G342C
3304, 3306, 3406, 3408, 3412, G3306, G3408, G3412, G342C
1W4910
COVER AS-MOTOR
3304, 3406, 3408, 3412, G3306
3304, 3406, 3408, 3412, G3306
3412, 3412C, 3412D, 3412E, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 3606, 3608, 3612, 3616, 3618, 5230, 5230B, 776C, 776D, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789B, 789C, 793B,...
6N7362
COVER-GEAR HOUSING
3412, 772, 777, D348, D379B, G379, G399
3412, 772, 777, D348, D379B, G379, G399
6N7541
COVER AS-MOTOR HOUSING
3412, 772, 777, D348, D379B, G379, G399
3412, 772, 777, D348, D379B, G379, G399
3126B, 3306B, 3406, 3406B, 3406C, 3408, 3408C, 3412, 3412C, AD30, AD45B, AD55, AD55B, AD60, C-15, C-9, C11, C13, C15, C18, C27, C32, C7, C9, C9.3, CG137-08, CG137-12, CX31-C13I, CX31-C15I, CX31-C18I, ...
3408, 3408C, 3412, 3412C, 3412D, 589, 631E, 637D, 637E, 651E, 657E, 769C, 771C, 773B, 775B, 834B, 988B, 988F, 990, 992C, 992D, D10, D10N, D8L, D9L, D9R, PM-565, PM3412, PR-1000, PR-450C, PR-750B
3408, 3412, 637D, 657E, 988B