COVER-END 6Y1087 - Caterpillar

Illustration 1 g02565417
Table 1
Specification for 276-7222 Oil Jet Tube As
Item Qty Part Specification Description
A - - Use the following dimensions in order to locate point (1) and point (2).
Dimension is 47.11 0.50 mm (1.854 0.020 inch).
B - - Dimension is 55.30 0.25 mm (2.177 0.010 inch).
C - - Dimension is 3.84 0.25 mm (0.151 0.010 inch).
D - - Dimension is 250.00 0.25 mm (9.843 0.010 inch).
Do not damage the inside surface of the piston jet orifices with the drill rod. Damage to the inside surface can cause the stream of oil to be altered.
The piston cooling jets (5) must be checked for the location of the stream of oil. Insert a straight drill rod with a diameter that fits snugly in each piston jet orifice. The inside diameter of piston jet orifice (3) is 2.40 mm (0.094 inch). The inside diameter of piston jet orifice (4) is 1.5 mm (0.06 inch). This drill rod simulates the stream of oil under normal operating pressure. Place the drill rod in orifice (4). The drill rod must pass through a circle with a diameter of 15.0 mm (0.60 inch) at location (2D). Place the drill rod in orifice (3). The drill rod must pass through a circle with a diameter of 9.0 mm (0.35 inch) at location (1D).