COVER A.-REAR 7B5643 - Caterpillar

Removal Procedure
Illustration 1 g00708680
Loosen bolts (1) that hold guard assembly (2) in position. Do not remove bolts (1) at this time.
Use two people in order to support the weight of guard assembly (2). The weight of guard assembly (2) is approximately 30 kg (66 lb). Remove bolts (1) and guard assembly (2). Remove the guard from the frame assembly.
Repeat Step 1 and Step 2 for the remaining two guard assemblies.Installation Procedure
Illustration 2 g00708679
Note: Guard assembly (2) is shown with the channels in an upward position. Guard assembly (2) can also be installed with the channels in a downward position (not shown). Refer to the following procedure in order to install the guards in either position.
Use two people in order to position guard assembly (2) on the frame assembly. The weight of guard assembly (2) is approximately 30 kg (66 lb). Install bolts (1) .
Repeat Step 1 for the remainings two guard assemblies.