COVER AS 7E1518 - Caterpillar

Illustration 1 g02841858
Typical example is shown
(A) Operating position
(B) Transport position
Illustration 2 g02842316
Typical example is shown
(1) Bolts
(C) Mirror heightTransport Position
In order to transport the machine, move the right side mirrors to transport position (B).
Loosen bolts (1) on the mirror support bracket and move the mirror to the transport position
Tighten bolts (1) on the mirror support bracket to a torque of 60 12 N m (44 9 lb ft).Operating Position
In order to operate the machine, move the right side mirrors to operating position (A).
Loosen bolts (1) on the mirror support bracket and return the mirrors to the operating position.
Adjust the mirrors to the correct mirror height (C) and tighten bolts (1) on the mirror support bracket to a torque of 60 12 N m (44 9 lb ft).Note: The dimensions for correct mirror height (C) are listed in the table below:
Table 1
Mirror Height (C)
Model Front Mirror Height Rear Mirror Height
320 (E-F)
323 (E-F)
324 (E)
326 (F)
329 (E)
330 (F)
335 (F)
336 (E-F) 454 3 mm (17.9 0.1 inch) 589 3 mm (23.2 0.1 inch)
349 (E-F) 1564 3 mm (61.6 0.1 inch) NA