COVER 7J2852 - Caterpillar

Cut cable straps (1). Disconnect harness assembly (2). Remove bracket (3). Remove speed sensor (4) and the O-ring seal.
Repeat Step 1 for the removal of speed sensor (5) .Removal Procedure (Torque Converter Output Speed Sensor)
Note: Cleanliness is an important factor. Before you begin the removal procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.Note: Put identification marks on all harness assemblies for installation purposes.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 2 g01528782
Remove cable straps (7). Disconnect harness assembly (6). Remove bracket (9). Remove speed sensor (8) and the O-ring seal.Removal Procedure (Engine Output Speed Sensor)
Note: Cleanliness is an important factor. Before you begin the removal procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.Note: Put identification marks on all harness assemblies for installation purposes.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 3 g01528802
Remove cable straps (10). Disconnect harness assembly (12). Remove bracket (11). Remove speed sensor (13) and the O-ring seal.Installation Procedure (Transmission Output Speed Sensor)
Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid. Allow