COVER-WATER PUMP 7W7676 - Caterpillar

1. Install lip seal in water pump housing with tooling (A). The lip of the seal must be toward the bearings. Put clean SAE 30 engine oil on the lip of the seal. 2. Install bearing (2) on shaft (1).3. Install shaft and bearing in housing. Install snap ring that holds bearing in place.4. Install bearing on gear. Install gear in the housing.5. Install bolt to hold gears in place. Tighten the bolt to a torque of 45 7 N m (32 5 lb. ft.). 6. Install seal and ring (3) in the housing.7. Install seal (4) and spring on the shaft. 8. Install impeller (6) and bolt (5). Tighten bolt to a torque of 39 1 N m (28 1 lb. ft.).END BY:a. install water pump