7Y1426 COVER Caterpillar parts
315C, 315D L, 318B, 318C, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 3...
Rating:
Alternative (cross code) number:
CA7Y1426
7Y-1426
7Y1426
CA7Y1426
7Y-1426
7Y1426
Weight: 39 pounds 17 kg.
EXCAVATOR, UNDERCARRIAGE,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
7Y1426 Cover (New AFTERMARKET) - G&T Engine Parts
G&T Engine Parts Fits equipment: ENGINE - MACHINE: 3046, 3066, 3116, 3126, C4.2, C6, C6.4; EXCAVATOR: 318B, 318B N, 318C, 320D FM, 320C, 320D GC, 323D2 L, 323D L, 320D LRR, 320ELRR, 323D LN, 320EL, 320D L, 320B, 320D, 323E SA, 319D LN, 321C, 319D L, 320E RR, 320E, 321D LCR, 320D2L, 323FL, 319C, 320C L, 320D2, 323E LN, 323D, 319D, 322B LN, 320C FM, 320D2GC, 320B S, 320D LN, 320B N, 320B L, 323D S, 318EL, 322B L, 323E L, 320D RR, 320E LN. || Condition: NEW AFTERMARKET || Weight: 44.55 lbs || Dimensions: 10-22.52-22.52 in || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts Fits equipment: ENGINE - MACHINE: 3046, 3066, 3116, 3126, C4.2, C6, C6.4; EXCAVATOR: 318B, 318B N, 318C, 320D FM, 320C, 320D GC, 323D2 L, 323D L, 320D LRR, 320ELRR, 323D LN, 320EL, 320D L, 320B, 320D, 323E SA, 319D LN, 321C, 319D L, 320E RR, 320E, 321D LCR, 320D2L, 323FL, 319C, 320C L, 320D2, 323E LN, 323D, 319D, 322B LN, 320C FM, 320D2GC, 320B S, 320D LN, 320B N, 320B L, 323D S, 318EL, 322B L, 323E L, 320D RR, 320E LN. || Condition: NEW AFTERMARKET || Weight: 44.55 lbs || Dimensions: 10-22.52-22.52 in || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
7Y1426 Cover (New AFTERMARKET) - G&T Engine Parts
G&T Engine Parts Fits equipment: ENGINE - MACHINE: 3046, 3066, 3116, 3126, C4.2, C6, C6.4; EXCAVATOR: 318B, 318B N, 318C, 320D FM, 320C, 320D GC, 323D2 L, 323D L, 320D LRR, 320ELRR, 323D LN, 320EL, 320D L, 320B, 320D, 323E SA, 319D LN, 321C, 319D L, 320E RR, 320E, 321D LCR, 320D2L, 323FL, 319C, 320C L, 320D2, 323E LN, 323D, 319D, 322B LN, 320C FM, 320D2GC, 320B S, 320D LN, 320B N, 320B L, 323D S, 318EL, 322B L, 323E L, 320D RR, 320E LN. || Condition: NEW AFTERMARKET || Weight: 44.55 lbs || Dimensions: 10-22.52-22.52 in || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts Fits equipment: ENGINE - MACHINE: 3046, 3066, 3116, 3126, C4.2, C6, C6.4; EXCAVATOR: 318B, 318B N, 318C, 320D FM, 320C, 320D GC, 323D2 L, 323D L, 320D LRR, 320ELRR, 323D LN, 320EL, 320D L, 320B, 320D, 323E SA, 319D LN, 321C, 319D L, 320E RR, 320E, 321D LCR, 320D2L, 323FL, 319C, 320C L, 320D2, 323E LN, 323D, 319D, 322B LN, 320C FM, 320D2GC, 320B S, 320D LN, 320B N, 320B L, 323D S, 318EL, 322B L, 323E L, 320D RR, 320E LN. || Condition: NEW AFTERMARKET || Weight: 44.55 lbs || Dimensions: 10-22.52-22.52 in || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
Number on catalog scheme:
21
For full view, you need register
Compatible equipment models: 7Y1426:
EXCAVATOR
315C
315D L
318B
318C
318E L
319C
319D
319D L
319D LN
320 L
320B
320C
320C FM
320C L
320D
320D FM
320D GC
320D L
320D LN
320D LRR
320D RR
320D2
320D2 GC
320D2 L
320E
320E L
320E LN
320E LRR
320E RR
320N
321B
321C
321D LCR
322
322 FM L
322 LN
322B
322B L
322B LN
323D L
323D LN
323D2 L
323E L
Information:
The following headings are for each menu of configuration for the gauge. Press the "MODE" key in order to reach any of these headings in the normal mode. After a selection has been made and the configuration has been performed, press the "ENTER" key. The display will read "SAVE/DONE". The new data may now be saved at this time. The "ESC" key can be used at any time to abort the configuration mode. The gauge will then return to the normal reading. During the configuration, the gauge allows the first level and the setpoints to change during a 20 second period. During the configuration, the gauge also allows the first level and the setpoints to be saved during a 20 second period. The gauge allows a 1 minute period for other levels between commands to change. The gauge also allows a 1 minute period for other levels to save a new configuration. If the time passes without a new command, the gauge will automatically return to the normal mode without making any changes. The new information is saved only if the "ENTER" key is pressed and the gauge reads "SAVE/DONE". Illustration 1 details the procedure for the configuration of the gauge.Input Configuration
The configuration for the input allows the user to configure the following parameters: the number of pulses per revolution, the decimal point, the ratio of the monitored teeth of the gear to the speed on the display and a predivide value for uneven input signals.Pulse Count
In order to set the count of the pulse, or the number of pulses per revolution, press the "MODE" key. The display then reads "InPt". Press the "ENTER" key. The display will then read "PPr" (pulses per revolution). Press the "ENTER" key. The previous numeric value that represents the count of the pulse will be shown. Press the scroll up key in order to increase the value until the desired count of the pulse is reached. Press the scroll down key in order to decrease the value until the desired count of the pulse is reached. Press the "ENTER" key in order to accept the new value and save the new value. The gauge will now be set for the desired count of pulses per revolution.Decimal Point
Only three decimal points are available. Only one decimal point can be on at a time. The addition of a decimal point to the display does not change the value of the scale of the displayed range. In order to set the decimal point, follow the above procedure from setting the count of the pulse. Do not press the "ENTER" key in order to finish the change. Press the "MODE" key. The display will show "d.Pnt". Use the scroll up key and the scroll down key in order to select the desired position of the decimal point. Press the "ENTER" key. The display will read "SCAL" (scale). If the application requires either an input ratio or a predivide, proceed to the next sections. If the application
The configuration for the input allows the user to configure the following parameters: the number of pulses per revolution, the decimal point, the ratio of the monitored teeth of the gear to the speed on the display and a predivide value for uneven input signals.Pulse Count
In order to set the count of the pulse, or the number of pulses per revolution, press the "MODE" key. The display then reads "InPt". Press the "ENTER" key. The display will then read "PPr" (pulses per revolution). Press the "ENTER" key. The previous numeric value that represents the count of the pulse will be shown. Press the scroll up key in order to increase the value until the desired count of the pulse is reached. Press the scroll down key in order to decrease the value until the desired count of the pulse is reached. Press the "ENTER" key in order to accept the new value and save the new value. The gauge will now be set for the desired count of pulses per revolution.Decimal Point
Only three decimal points are available. Only one decimal point can be on at a time. The addition of a decimal point to the display does not change the value of the scale of the displayed range. In order to set the decimal point, follow the above procedure from setting the count of the pulse. Do not press the "ENTER" key in order to finish the change. Press the "MODE" key. The display will show "d.Pnt". Use the scroll up key and the scroll down key in order to select the desired position of the decimal point. Press the "ENTER" key. The display will read "SCAL" (scale). If the application requires either an input ratio or a predivide, proceed to the next sections. If the application
Cat SIS web machinery list:
Parts cover Caterpillar catalog:
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 313D, 313D2, 315C, 315D L, 318C, 318D L, 318D2 L, 319D L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 3...
311C, 311D LRR, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315D L, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN...
318C, 319C, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321C, 321D LCR, 323D L, 323D LN, 323D SA
312D, 320B, 320C, 323D LN, 323D SA, 323E L, 325, 325 L, 325 LN, 325B, 325B L, 325C, 325D, 325D L, 325D MH, 328D LCR, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 330, 330 FM L, 330 L, 330B L, 330C, 3...
225, 235, 245, 561C, 572G, 572R, 572R II, 951B, 953, 953C, 955C, 955H, 955K, 955L, 963B, 963C, 973, 973C, 973D, 977K, 983B, D5, D5B, D5E, D5H, D5H XL, D6C, D6D, D6E, D6E SR, D6G, D6G SR, D6G2 LGP, D6G...
311, 311B, 312, 312B, 320, 320 L, 320B, 320B FM LL, 320N
320B, 322B L, 325, 325 L, 325 LN, 325B, 325B L, OEMS
322B, 322B L, 322B LN
322, 322 FM L, 322B, 322B L, 322B LN, OEMS
320B, 320C, 320C FM
320C, 320C FM, 320D, 320D FM, 320D FM RR, 322C, 322C FM, 323D LN, 323D SA, 323E L, 324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 325C, 325C FM, 325D, 325D L, 325D MH, 326D L, 329D, 329D L, 329D LN, 32...
320 L, 320N
1352369
COVER
311C, 311D LRR, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315, 315B, 315C, 315D L, 317B LN, 318B, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320B, 320C, 320C FM, 320C L, 320D, 320D FM...
311C, 311D LRR, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315, 315B, 315C, 315D L, 317B LN, 318B, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320B, 320C, 320C FM, 320C L, 320D, 320D FM...
1183784
COVER
315B, 315B FM L, 315C, 317B LN, 318B, 933, 933C, 939C, D3C III, D3G, D4C III, D4G, D5C III, D5G
315B, 315B FM L, 315C, 317B LN, 318B, 933, 933C, 939C, D3C III, D3G, D4C III, D4G, D5C III, D5G
1469447
COVER AS
315, 315B, 315B FM L, 315C, 317B LN, 318B, 933, 933C, 939C, D3C III, D3G, D4C III, D4G, D5C III, D5G
315, 315B, 315B FM L, 315C, 317B LN, 318B, 933, 933C, 939C, D3C III, D3G, D4C III, D4G, D5C III, D5G
0968700
COVER
307, 315, 315B, 315B FM L, 315C, 317B LN, 318B, 933, 933C, 939C, D3C III, D3G, D4C III, D4G, D5C III, D5G, E120, E140, E70, E70B
307, 315, 315B, 315B FM L, 315C, 317B LN, 318B, 933, 933C, 939C, D3C III, D3G, D4C III, D4G, D5C III, D5G, E120, E140, E70, E70B
1376386
COVER KIT-LOCK
315, 315B, 315C, 317B LN, 318B, 933, 933C, 939C, D3C III, D3G, D4C III, D4G, D5C III, D5G
315, 315B, 315C, 317B LN, 318B, 933, 933C, 939C, D3C III, D3G, D4C III, D4G, D5C III, D5G
1317846
COVER
303.5C, 304C CR, 304D CR, 305C CR, 315, 315B, 315C, 317B LN, 318B, 933, 933C, D3C III, D4C III, D5C III
303.5C, 304C CR, 304D CR, 305C CR, 315, 315B, 315C, 317B LN, 318B, 933, 933C, D3C III, D4C III, D5C III
1497843
COVER
301.5
301.5
1195360
COVER
311C, 313D2 LGP, 315C, 315D L, 316E L, 318B, 318C, 318D L, 318D2 L, 319D L, 320B, 320C, 320C FM, 320C L, 320D, 320D LRR, 321C, 322, 322B L, 322B LN, 322C, 322C FM, 325 L, 325B, 325B L, 330 L, 330B L, ...
311C, 313D2 LGP, 315C, 315D L, 316E L, 318B, 318C, 318D L, 318D2 L, 319D L, 320B, 320C, 320C FM, 320C L, 320D, 320D LRR, 321C, 322, 322B L, 322B LN, 322C, 322C FM, 325 L, 325B, 325B L, 330 L, 330B L, ...
1709967
COVER
308E, 308E CR, 308E SR, 318B
308E, 308E CR, 308E SR, 318B
1023858
COVER
315, 315B, 317B LN, 318B
315, 315B, 317B LN, 318B
1271428
COVER AS
317B LN, 318B, 320B, 322B L, 322B LN, OEMS
317B LN, 318B, 320B, 322B L, 322B LN, OEMS
1271427
COVER AS
317B LN, 318B, 320B, 322B L, 322B LN, OEMS
317B LN, 318B, 320B, 322B L, 322B LN, OEMS