COVER 8D2477 - Caterpillar

Illustration 1 g03343010
Table 1
Specification for 382-6564 Oil Pan Gp
Item Qty Part Specification Description
1 1 4B-2363 Oil Drain Plug Torque to 145 15 N m (107 11 lb ft).
2 1 7E-2630 Oil Pan Gasket Before assembly, apply red Loctite 596 to both sides of the gasket joints.
3 38 5P-5855 Bolt After assembly, as required apply green Loctite 290 to the open top end of the bolt holes of the oil pan
4 5 1A-2029 Bolt Use the following procedure in order to tighten the bolts:
1. First tighten five bolts (4) to standard torque.
2. Tighten ten bolts (5) in a numerical sequence as shown in Illustration 1 to a standard torque.
5 10
6 4 5P-5700 O-Ring Seal Before assembly, lubricate the bore lightly with the lubricant that is being sealed.
7 2 6V-4315 O-Ring Seal Before assembly, lubricate the bore lightly with the lubricant that is being sealed.
8 2 3P-0654 O-Ring Seal Before assembly, lubricate the bore lightly with the lubricant that is being sealed.