8J2416 COVER Caterpillar parts
245, 518, 518C, 528, 528B, 530B, 561C, 571G
Rating:
Alternative (cross code) number:
CA8J2416
8J-2416
8J2416
CA8J2416
8J-2416
8J2416
Weight: 0.30 pounds 0 kg.
EXCAVATOR, WHEEL SKIDDER,
Compatible equipment models: 8J2416:
Number on catalog scheme:
13
For full view, you need register
Information:
Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Inspect the condition of the gaskets. Replace the gaskets, if necessary.
Illustration 1 g00545514
Typical example
Illustration 2 g00545513
Typical example
Position gaskets (11) and inlet manifold (14) on the cylinder head.Note: Ensure that the front gaskets and the rear gaskets are installed with the notch at the top left side. The center gasket can be installed in either way.
Install bolts (13) that hold inlet manifold (14) on the cylinder head.
Position the turbocharger support on the side of the inlet manifold (14) .
Install bolts (12) that hold the turbocharger support.
Connect boost pressure inlet (10) to inlet manifold (14) .
Install gasket (4) and elbow (2) with four bolts (3) on inlet manifold (14) .
Connect hose assembly (9) to the turbocharger.
Tighten two hose clamps (8) .
Place the bracket for fuel line (6) in position and install two bolts (7) .
Connect fuel line (6) to the air inlet heater.
Connect electrical connector (5) for the air inlet heater, if necessary.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Inspect the condition of the gaskets. Replace the gaskets, if necessary.
Illustration 1 g00545514
Typical example
Illustration 2 g00545513
Typical example
Position gaskets (11) and inlet manifold (14) on the cylinder head.Note: Ensure that the front gaskets and the rear gaskets are installed with the notch at the top left side. The center gasket can be installed in either way.
Install bolts (13) that hold inlet manifold (14) on the cylinder head.
Position the turbocharger support on the side of the inlet manifold (14) .
Install bolts (12) that hold the turbocharger support.
Connect boost pressure inlet (10) to inlet manifold (14) .
Install gasket (4) and elbow (2) with four bolts (3) on inlet manifold (14) .
Connect hose assembly (9) to the turbocharger.
Tighten two hose clamps (8) .
Place the bracket for fuel line (6) in position and install two bolts (7) .
Connect fuel line (6) to the air inlet heater.
Connect electrical connector (5) for the air inlet heater, if necessary.
Cat SIS web machinery list:
Parts cover Caterpillar catalog:
12F, 140, 141, 14E, 153, 16, 163, 172, 191, 518, 518C, 816, 941, 951B, D5B, D5E, D6D, D6E, D6E SR
120B, 12E, 140, 140B, 14E, 561B, 561C, 561D, 571G, 572G, 583H, 583K, 594, 594H, 931B, 955C, 977D, D3B, D4D, D4E, D4E SR, D5, D5B, D5E, D6C, D6D, D6D SR, D6E SR, D6G SR, D8H, D9E
120B, 12E, 140, 140B, 14E, 561B, 561C, 561D, 571G, 572G, 583H, 583K, 594, 594H, 931B, 955C, 977D, D3B, D4D, D4E, D4E SR, D5, D5B, D5E, D6C, D6D, D6D SR, D6E SR, D6G SR, D9E
16, 172, 173B, 183B, 528, 528B, 530B, 561H, 561M, 613, 613B, 613C, 613C II, 621, 631C, 633C, 633D, 641, 641B, 650B, 651, 651E, 657E, 657G, 666, 824B, 825B, 834, 916, 920, 926, 930, 930R, 988, D250B, D...
518, 528, 528B, 530B, 613C, 613C II, 613G, 725, 725C, 730, 730C, 769C, 773B, 916, 936, 950, 950B, 950B/950E, D250D, D250E, D250E II, D300B, D300D, D300E, D300E II, G936
518, 528B, 530B, 613C, 613C II, 814B, 815B, 816B, 916, 920, 926, 936, 966D, D250B, D25C, D25D, D300B, D30C, D350C, D400, D40D, FB518, G936, IT18B, IT28B
518, 930, 930R
518, 528, 613, 613B, 814, 815, 950, 966C
518, 910, 920
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 160G, 160H, 160H ES, 160H NA, 163H NA, 518C, 528, 528B, 530B, 936, 936F, 950B/950E
525B, 528, 528B, 530B, 533, 535B, 543, 545, 814, 815, 824C, 826C, 950, 966C, 980C, 980F, HA770, HA771, HA870, HA871, R1300, R1300G, R1300G II, R1600, R1600G, R1600H, R1700 II, R1700G, TK370, TK371, TK...
530B, 950F II, 960F, 966F, 966F II, 970F
8J3649
COVER
245, 992C
245, 992C
8J8841
COVER
245
245
9J5625
COVER
215, 926, 936, 936F, AP-1000, AP-200, AP-200B, PM-201, PM-565, PM-565B, PR-1000
215, 926, 936, 936F, AP-1000, AP-200, AP-200B, PM-201, PM-565, PM-565B, PR-1000
245, 613C, 615C, 815B, 826C, 930, 950F, 950F II, 953, 953C, 963, 963C, 966D, 966F, 966F II, 973, 992C, D250B, D300B, D4HTSK II, D5H, D5HTSK II, D6C, D6H, D7G, D8K, IT12B
2V0219
COVER
225
225
9J5516
COVER
225
225
9J3966
COVER
215
215
5C4251
COVER
215, 215B
215, 215B
9J6386
COVER
215, 245
215, 245
215, 225, 225D, 229, FB221
8K0485
COVER
225
225
8K0613
COVER
225
225