COVER-CAM HOUSING-LH 8N5219 - Caterpillar

Illustration 8 g01835678
Install cartridge (34), coil assembly (33), and nut (32). Tighten cartridge (34) to a torque of 35 3 N m (26 2 lb ft). Tighten nut (32) to a torque of 20 3 N m (175 27 lb in). Repeat for the other housing assembly.
Illustration 9 g01835524
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install valve (31), spring (30), and plug (29). Tighten plug (29) to a torque of 300 40 N m (220 30 lb ft).
Install plug assembly (28). Tighten plug assembly (28) to a torque of 145 15 N m (105 11 lb ft).
Illustration 10 g01835523
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install spool (27).
Install retainer (26), spring (25), and retainer (24). Repeat for the opposite side.
Install housing assembly (23).
Illustration 11 g01835520
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install housing assembly (22).
Illustration 12 g01835519
Manifold
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install valve (19), spring (20), the spacers, and plug (21) into body (18). Tighten plug (21) to a torque of 140 15 N m (105 11 lb ft).
Illustration 13 g01835518
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install O-ring seals (17). Lubricate O-ring seals (17) with lubricant that is being sealed.
Install valve (12), spacers (13), spring (14), nut (16), and retainer (15) into body (11). Tighten nut (16) to a torque of 50 7 N m (37 5 lb ft).
Illustration 14 g01835516
Install valve assembly (8), valve assembly (9), and orifice (10). Tighten valve assembly (8) to a torque of 135 15 N m (100 11 lb ft). Tighten valve assembly (9) to a torque of 65 7 N m (48 5 lb ft). Tighten orifice (10) to a torque of 10 1 N m (89 9 lb in).
Illustration 15 g01835514
Install plug (7).
Illustration 16 g01835513
Position cover (1), tilt valve (2), lift valve (5), and manifold (6). Install studs (4) and nuts (3). End By:
Install the main control valve.