COVER 9S6739 - Caterpillar

Illustration 5 g06220046
A view of an Engine Parameters page. Parameter listings may vary, depending on the machine model and equipped features.
(3) Non-Interactive Scroll bar with sliding indicator
(4) UP Arrow button
(6) DOWN Arrow button
(7) BACK button
(8) HOME button
Press the Machine button (1) that is located on the right side of the Information Display. The Machine menu page will appear.
Press the Parameters menu button (2). The button will turn first to blue, then turn to yellow. The Parameters menu page will appear.
Press the Engine menu button (10). The button will turn first to blue, then to yellow. The Engine Parameters page will appear.
Scroll through the list of Parameters by using the UP Arrow button (4) or the DOWN Arrow button (6). The Menu Sliding indicator of the Non-Interactive Scroll Bar (3) will move accordingly.
Press the BACK button (7) to return to the previous menu.
Press the Home button (8) to return to the Home page.Tire Monitor
Machine > Parameters > Tire MonitorNote: The Tire Pressure Monitoring System must be installed.
Illustration 6 g06228603
(3) Non-Interactive Scroll bar with sliding indicator
(4) UP Arrow button
(5) OK button
(6) DOWN Arrow button
(7) BACK button
(8) HOME button
(11) Tire Monitor menu buttonThe Tire Monitor will keep the operator aware of the status of the pressure and temperature of the machine’s tires.
Press the Tire Monitor menu button (11). The menu button will turn blue, then turn yellow. The Tire Monitor data page will appear.
Illustration 7 g06228629
Tire Monitor data page
(12) Tire Monitor
(13) Target Pressure Front Axle/Rear Axle dataThe Target Pressure data (13) will keep the operator aware of what the target pressure of the tires per axle (Front Axle – Top) (Rear Axle – Bottom).The Tire Monitor (12) will keep the operator aware of the status of the pressure and temperature of each tire.
Illustration 8 g06228641
(7) BACK button
(8) HOME button
(12) Tire Monitor
(14) Temperature/Pressure toggle button
Pressing the Temperature/Pressure toggle button (14) will allow the operator to toggle between viewing the pressure or the temperature shown by the Tire Monitor (12).Pressure
Illustration 9 g06228656
(14) Temperature/Pressure toggle buttonThe tire pressure will be displayed as either “psi” (English unit – Pounds per Inch) or as “kPa” (Metric unit – Kilopascal).Note: The measuring units (English and Metric) can be changed on the Information Display. For more information, refer to the following section in this manual:
Display > UnitsTemperature
Illustration 10 g06228665
The tire pressure will be displayed as either “ºF” (English unit: Degrees - Fahrenheit) or as “ºC” (Metric unit: Degrees - Celsius).
(14) Temperature/Pressure toggle buttonNote: The measuring units (English and Metric) can be changed on the Information Display. For more information, refer to the following section in this manual:
Display > UnitsTemperature/Pressure Sensor Indicators
Illustration 11 g06228672
(15) Left Rear Tire
(16) Left Front Tire
(17) Right Front Tire
(18) Right Rear TireThe Tire Monitor has four Temperature/Pressure Sensor Indicators, one sensor for each tire:
Left Rear Tire (15)
Left Front Tire (16)
Right Front Tire (17)
Right Rear Tire (18)
Illustration 12 g06228684
( 14) Temperature/Pressure toggle button
(15) Left Rear Tire
(17) Right Front TireThe operator is notified of a warning when the reading of each tire is surrounded by warning frame.An arrow inside the warning frame will indicate that