CRADLE A 0098492 - Caterpillar

2. Disconnect tube assemblies (1) and (2). 3. Disconnect hose assemblies (3) and (4). 4. Put a suitable floor jack in position under the pump. Remove the two bolts and pump (5). Remove the O-ring seal from the pump. The weight of the pump is 46 kg (101 lb). The following steps are for installation of the elevator pump.5. Install the O-ring seal on the pump.6. Use a floor jack and put pump (5) in position and install the two bolts.7. Install hose assemblies (3) and (4).8. Install tube assemblies (1) and (2).9. Fill the hydraulic system and transmission with oil to the correct level.