CRANK 2030670 - Caterpillar

Removal Procedure
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" , M0066576.Start By:
Remove counter weight.
Contact with high pressure fuel may cause fluid penetration and burn hazards. High pressure fuel spray may cause a fire hazard. Failure to follow these inspection, maintenance and service instructions may cause personal injury or death.
Ensure that all adjustments and repairs that are carried out to the fuel system are performed by authorized personnel that have the correct training.Before beginning ANY work on the fuel system, refer to Operation and Maintenance Manual, "General Hazard Information and High-Pressure Fuel Lines" for safety information.Refer to System Operation, Testing and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system.
Turn the fuel supply to the OFF position.
Turn the battery disconnect switch to the OFF position.
Check the fuel injection timing. Refer to System Operation, Testing and Adjusting, "Fuel Injection Timing - Check", UENR4515 for the correct procedure.
Illustration 1 g06245858
Illustration 2 g06245860
Illustration 3 g06245863
Illustration 4 g06245864
Illustration 5 g06245866
Remove the gasket.
Installation Procedure
Install fuel injection pump in the reverse order of removal.
Illustration 6 g06245870
Illustration 7 g06245871