CRANKSHAFT AS 1375920 - Caterpillar

Caterpillar now offers Remanufactured Cylinder Heads, both bare heads and head groups, to service 100% of 3406 Engines back to first production. Because of design changes since first production cylinder heads for 3406 Engines have several different service part numbers. This article summarizes the information for determining the correct cylinder head repair option for each type of 3406 Engine.
Remanufactured Bare Cylinder Heads
Two bare heads service all 3406 Engines.
... OR0832 (modified alloy casting) fits all engines with 55 mm adapter bores (includes earlier 3406B Engines).
... OR1158 (modified alloy casting) fits all engines with 40 mm adapter bores.
Remanufactured Cylinder Head Groups
... OR0945 (original alloy or modified alloy casting) fits all 3406 Precombustion Chamber Engines.
... OR09771 (compacted graphite or modified alloy casting) fits all 3406 Direction Injection Engines with 55 mm adapter bore, except Series B Engines.
... OR14451 (original alloy casting) fits all 3406 Direct Injection Engines of 350 hp or less (including all vehicular applications) with 55 mm adapter bore, except Series B Engines.
... OR1160 (modified alloy casting/40 mm adapter bore, includes double valve springs) fits all 3406B Truck Engines and requires the later style nozzle.
... OR1161 (modified alloy casting/40 mm adapter bore) fits all 3406B Engines in applications other than trucks and requires the later style nozzle.
1These cylinder heads can contain either six of the former adapter (1W7884, lots 12 and up) or the current style adapter. Adapters will not be mixed on a given head. The 1W7884 Adapter, lots 12 and up, is permissible for reuse and Caterpillar reuses those that meet specification. Each Remanufactured Head will have the necessary hardware for the adapters used in that head.Important Points To Remember When Selling Remanufactured Cylinder Heads' Lower Price Offering (OR1445 Cylinder Head Group)
The OR1445 Cylinder Head Group is a relatively new offering in the Remanufactured Program and fits 3406 DI Engines of 350 hp or less including all vehicular applications (not adaptable to 3406B Engines). It uses the original alloy iron casting which conforms 100% to engineering standards at lower horsepowers. This group is priced approximately $180 below the suggested consumer price for OR0977 Head. Customers with lower horsepower engines can receive the same benefits as the higher priced OR0977 Head and save $180. Unless there are plans to raise the horsepower of the engine above 350 hp, the lower priced OR1445 Cylinder Head Group should be purchased.
Head Groups For Earlier 3406B Engines
3406B Engines in the following serial number ranges used a cylinder head with a 55 mm adapter: 3406B Industrial: 6TB1-17783406B Marine: 4TB1-4693460B Gen. Set: 2WB1-16763406B Truck: 7FB1-211313406B Vehicular Used In:824, 825, 826, and 980: 70V16378-1862816G: 70V16551-18628245: 70V15846-18628
Because the 40 mm design head is far superior to the 55 mm design head, Caterpillar has elected to offer only the 40 mm design casting (modified alloy) for Remanufactured Head Groups for 3406B Engines. For engines in the above serial number ranges, this can mean additional costs for a Remanufactured Head Group.
1. If the nozzles are the former style, they will have to be replaced. The cost of six