CRANKSHAFT GP 2128549 - Caterpillar

Illustration 1 g01627665
Note: During assembly, the front face of the flywheel housing and the rear face of the cylinder block must be free of the following: oil, fuel, water, gasket adhesive, assembly compounds and any other foreign material.Note: Apply 8T-9022 Silicone Gasket in order to fill the space between the cylinder block, the flywheel housing, and the oil pan. Note: Before assembly, apply 4C-4030 Thread Lock Compound to the threads of the bolts. (1) Torque for 12 bolts ... 105 20 N m (75 15 lb ft) (2) Torque for two bolts ... 105 20 N m (75 15 lb ft)
Illustration 2 g01625061
Note: Apply 8T-9022 Silicone Gasket to the area of the gasket of the housing between points (3) and (4) .
Illustration 3 g01625056
(5) Lubricate the sealing lip of the lip type seal with the lubricant that is being sealed. (6) Lubricate the bore of the O-ring seal lightly with the lubricant that is being sealed.