CRANKSHAFT A. 2B4725 - Caterpillar

2. Remove three bolts (1) from the accelerator pedal, all trim studs (2) and remove floor mats (3). 3. Remove two screws (4) and rear floor plate (5). 4. Remove nut (6), washer (7) and disconnect cable (8) from the sender unit.5. Remove five bolts (9) and remove sender unit (10) and gasket (11) from the fuel tank.Fuel Tank Gauge Sender Unit - Install
1. Install gasket (11) and sender unit (10) onto the fuel tank and secure with five bolts (9).2. Install sender cable (8) and secure with washer (7) and nut (6). 3. Install rear floor plate (5) and secure with two screws (4). 4. Install floor mats (3) and trim studs (2). Locate the accelerator pedal and secure with three bolts (1).5. Connect the battery.