CRANKSHAFT GP 3470968 - Caterpillar

Illustration 1 g00869470Make sure that the frame lock link (1) is removed from the machine. The frame lock link must be removed in order to articulate the machine.
Illustration 2 g00869487Remove the wheel lean bolt (2) from the locked position. The wheel lean bolt must be removed in order to lean the wheels.Start the engine only from the operator's compartment. Never short across the starter terminals or across the batteries. Shorting could bypass the engine neutral start system. Shorting could also damage the electrical system.
Illustration 3 g00877885Make sure that the machine horn works properly.
Illustration 4 g00810739The mirrors on your machine may be different. Adjust the mirrors for the best operator vision. Adjust the inside mirror or the inside mirrors before you operate the machine. If the machine is equipped, adjust the outside mirrors before you operate the machine.Inspect the condition of the seat belt and the condition of mounting hardware. Replace any damaged parts and any worn parts. Regardless of appearance, replace the seat belt after three years of use. Do not use a seat belt extension on a retractable seat belt.Adjust the seat in order to achieve full pedal travel when the operator's back is against the back of the seat. Adjust the steering column tilt lever in order to enhance the operation of the machine from the operator's seat. Adjust the steering wheel tilt lock in order to enhance the operation of the machine from the operator's seat.Make sure that the machine is equipped with a lighting system that is adequate for the job conditions. Make sure that all lights are working properly. Before you start the engine or before you move the machine, make sure that no one is on the machine, underneath the machine, or around the machine. Make sure that there are no personnel in the area.