CRANKSHAFT AS 3567064 - Caterpillar

Location of the 113-7920 and 113-7922 Bearing Assemblies in the 113-4328 Final Drive And Brake Wheel Group. 113-7920 Bearing Assembly (1). 113-7922 Bearing Assembly (2). Final Drive Bearing Assembly Installation
Detail of Area A 8X-0563 Lock Ring (1). Planet Gears (2). Cup spacer (3). Cone spacer (4). 8X-0603 Carrier (5). 7I-5534 Shaft (6). 8X-0566 Shim Pack (7) 6V-3303 Bolts (8). 8X-0567 Plate (9). 113-7922 Bearing Assembly (10).1. Install lock ring (1) in each of the four planet gears (2).2. Install one of the cups from the bearing assembly (10) in the small off-set side (C) of the gear. Make sure the cup is fully seated against the lock ring (1). Do not chill the cups before installation. The cups should be pressed in the gear at ambient room temperature. The 113-7922 Bearing Assembly parts are matched components and must mot be mixed with other bearing assemblies.3. Turn the gear over and install the cup spacer (3) against the lock ring (1).4. Install the remaining bearing assembly cup in the gear. Make sure the cup and spacer are fully seated against the lock ring.5. Install the bearing cones and bearing cone spacer in the gear. Take special care to make sure the cone spacer (4) is installed between the bearing cones.6. Position the four gear assemblies in the carrier (5).7. Make sure the gears and bearings are centered in