3764077 CRANKSHAFT Caterpillar parts
450F, C4.4, C4.4XQ100, CP-68B, CP-74B, CS-56B, CS-66B, CS-76B, CS-78B
Rating:
Alternative (cross code) number:
CA3764077
376-4077
3764077
CA3764077
376-4077
3764077
Weight: 85 pounds 38 kg.
BACKHOE LOADER, VIBRATORY COMPACTOR,
Compatible equipment models: 3764077:
Number on catalog scheme:
3
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 185-3630 Strap Wrench As 1 Start By:
Remove the engine oil cooler. Refer to Disassembly and Assembly, "Engine Oil Cooler - Remove".
Illustration 1 g02119597
Disconnect tube assembly (1).
Use Tooling (A) in order to remove oil filters (5). Drain the oil from the oil filters into a suitable container for storage or for disposal. Discard the filters.
Remove four bolts (2). Remove three bolts (4) and remove the oil filter base (3).
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Illustration 2 g02120154
Remove plug (6), spring (7) and plunger (8).
Remove plug (11), spring (10) and plunger (9). Installation Procedure
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Install the engine oil filter base in the reverse order.
Apply clean engine oil to the seal which is found on oil filter assemblies (5). Hand tighten oil filters (5) until the seal contacts the sealing surface of the oil filter base (3). Tighten oil filters (5) to an additional turn of 270 degrees. Change the engine oil. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 185-3630 Strap Wrench As 1 Start By:
Remove the engine oil cooler. Refer to Disassembly and Assembly, "Engine Oil Cooler - Remove".
Illustration 1 g02119597
Disconnect tube assembly (1).
Use Tooling (A) in order to remove oil filters (5). Drain the oil from the oil filters into a suitable container for storage or for disposal. Discard the filters.
Remove four bolts (2). Remove three bolts (4) and remove the oil filter base (3).
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Illustration 2 g02120154
Remove plug (6), spring (7) and plunger (8).
Remove plug (11), spring (10) and plunger (9). Installation Procedure
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Install the engine oil filter base in the reverse order.
Apply clean engine oil to the seal which is found on oil filter assemblies (5). Hand tighten oil filters (5) until the seal contacts the sealing surface of the oil filter base (3). Tighten oil filters (5) to an additional turn of 270 degrees. Change the engine oil. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change".
Caterpillar parts catalog:
Parts crankshaft Caterpillar catalog:
3464197
CRANKSHAFT GP
312E, 312E L, 314E CR, 314E LCR, 316E L, 318E L, 416F, 420F, 428F, 430F, 432F, 434F, 444F, 450F, C4.4, C4.4XQ80, CB-44B, CB-54B, CP-54B, CS-54B, CS-64B, CW-34, D3K2 LGP, D4K2 XL, D5K2 XL
312E, 312E L, 314E CR, 314E LCR, 316E L, 318E L, 416F, 420F, 428F, 430F, 432F, 434F, 444F, 450F, C4.4, C4.4XQ80, CB-44B, CB-54B, CP-54B, CS-54B, CS-64B, CW-34, D3K2 LGP, D4K2 XL, D5K2 XL
3558526
CRANKSHAFT GP
312E, 312E L, 314E CR, 314E LCR, 316E L, 318E L, 416F, 420F, 428F, 430F, 432F, 434F, 444F, 450F, C4.4, C4.4XQ80, CB-44B, CB-54B, CP-54B, CS-54B, CS-64B, CW-34, D3K2 LGP, D4K2 XL, D5K2 XL
312E, 312E L, 314E CR, 314E LCR, 316E L, 318E L, 416F, 420F, 428F, 430F, 432F, 434F, 444F, 450F, C4.4, C4.4XQ80, CB-44B, CB-54B, CP-54B, CS-54B, CS-64B, CW-34, D3K2 LGP, D4K2 XL, D5K2 XL
3645234
CRANKSHAFT AS
450F, C4.4
450F, C4.4
3645843
CRANKSHAFT GP
450F, C4.4
450F, C4.4
3764076
CRANKSHAFT
312E, 312E L, 314E CR, 314E LCR, 316E L, 318E L, 420F, 428F, 430F, 450F, C4.4, CB-44B, CB-54B, CP-54B, CS-54B, CS-64B, CW-34, D3K2 LGP, D4K2 XL, D5K2 XL
312E, 312E L, 314E CR, 314E LCR, 316E L, 318E L, 420F, 428F, 430F, 450F, C4.4, CB-44B, CB-54B, CP-54B, CS-54B, CS-64B, CW-34, D3K2 LGP, D4K2 XL, D5K2 XL
120M 2, 2570C, 2670C, 320D2, 320D2 GC, 320D2 L, 323D2 L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 525D, 535D, 545D, 555D, 563C, 573C, 924K, 930K, 938K, 950 GC, 950K, 962K, BG1000E, BG1055E, C4.4,...
3645233
CRANKSHAFT AS
C4.4, CS-56B, CS-78B
C4.4, CS-56B, CS-78B
3879840
CRANKSHAFT AS
236D, 242D, 246D, 257D, 259D, 262D, 277D, 279D, 287D, 289D, 308E, 308E CR, 308E SR, 308E2 CR, 906H2, 907H2, 908H2
236D, 242D, 246D, 257D, 259D, 262D, 277D, 279D, 287D, 289D, 308E, 308E CR, 308E SR, 308E2 CR, 906H2, 907H2, 908H2
3764076
CRANKSHAFT
312E, 312E L, 314E CR, 314E LCR, 316E L, 318E L, 420F, 428F, 430F, 450F, C4.4, CB-44B, CB-54B, CP-54B, CS-54B, CS-64B, CW-34, D3K2 LGP, D4K2 XL, D5K2 XL
312E, 312E L, 314E CR, 314E LCR, 316E L, 318E L, 420F, 428F, 430F, 450F, C4.4, CB-44B, CB-54B, CP-54B, CS-54B, CS-64B, CW-34, D3K2 LGP, D4K2 XL, D5K2 XL
314E LCR, 416F, 432F, 434F, 444F, C4.4XQ80, CW-34
3895185
CRANKSHAFT AS
272D, 272D XHP, 299D, 299D XHP, 910K, 914K
272D, 272D XHP, 299D, 299D XHP, 910K, 914K
2947922
CRANKSHAFT
236B, 236B3, 242B3, 246C, 252B, 252B3, 256C, 257B3, 259B3, 262C, 262C2, 272C, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C, 3044C, 906H, 907H, 908H, C3.4
236B, 236B3, 242B3, 246C, 252B, 252B3, 256C, 257B3, 259B3, 262C, 262C2, 272C, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C, 3044C, 906H, 907H, 908H, C3.4
236B, 246C, 252B, 256C, 262C, 267B, 268B, 272C, 277C, 287C, 297C, 3044C, 906, 906H, 907H, 908, 908H, C3.4
3412, D9L, G3412
3412, 773B, 992C
235, G3306
12G, 140G, 160H, 235, 3306, 3306B, 966C, 977L, D25C, D300B, D30C, D350C, D35C, D5, D6C, D6H, D7G
428, CB-424, CS-323, PR-75, PS-110, PS-130, PS-180, RT50