CRANKSHAFT AND DAMPER GROUP 4M2709 - Caterpillar

4M2709 CRANKSHAFT AND DAMPER GROUP Caterpillar parts 641, 651, 657

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA4M2709
4M-2709
4M2709

Caterpillar 4M2709 CRANKSHAFT AND DAMPER GROUP

Buy CRANKSHAFT AND DAMPER GROUP 4M2709 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL TRACTOR,

Compatible equipment models: 4M2709:

WHEEL TRACTOR 641 651 657 Caterpillar

Number on catalog scheme:

Caterpillar 4M2709 Parts scheme CRANKSHAFT AND DAMPER GROUP

For full view, you need register

Information:

Make reference to on first page of HYDRAULIC SYSTEM TESTING AND ADJUSTING section.
6V4161 Hydraulic Test Group.1. Connect a 6V3081 Hose to pressure tap (23) with a 6V4143 Coupler. Install a 28 000 kPa (4000 psi) pressure gauge.2. Start the engine and lift the lift arms until they are parallel with the ground. Move the tilt control lever to DUMP position until the implement is fully dumped. Release the tilt control lever.
RIGHT SIDE OF LIFT ARMS
23. Pressure tap for head end of tilt cylinders.3. Increase engine rpm to high idle. Look at the test gauge and move the lift control lever to RAISE position. The high reading on the test gauge is the pressure setting of the relief valve. The high reading on the test gauge must be 10 000 300 kPa (1500 45 psi).
RIGHT SIDE OF MACHINE
24. Relief valve for head end of tilt cylinders.
RELIEF VALVE FOR HEAD END OF TILT CYLINDERS
7. Nut. 8. Adjustment screw.4. If it is necessary to change the pressure setting of relief valve (24), lower the implement to