CRANKSHAFT AS 7E3916 - Caterpillar

Illustration 1 g06217410
Table 1
Item Qty Part Specification Description
1 1 248-2507 Bearing Diameter is 150.250 0.025 mm (5.9153 0.0010 inch).
A 1 503-8434 Rod As Diameter is 152.350 0.038 mm (5.9980 0.0015 inch).
B 1 503-8432 Cylinder As Bore diameter is 266.70 0.10 mm (10.500 0.004 inch).
2 1 161-5811 Bearing Diameter is 180.390 0.025 mm (7.1020 0.0010 inch).
C 1 271-3574 Head Bore over two lands is 153.40 0.13 mm (6.039 0.005 inch).
3 1 3G-5022 Locknut Before assembly, lubricate the threads.
Torque to 13500 1350 N m (9957 996 lb ft).
4 1 229-9549 Piston Before assembly, lubricate the threads.
Torque to 800 80 N m (590 59 lb ft).
5 1 390-1269 Buffer Seal As Lubricate lightly with lubricant that is being sealed.
6 2 390-1270 U-Cup Seal Lubricate lightly with lubricant that is being sealed.
7 2 147-0169 Bolt Torque to 3100 350 N m (2286 258 lb ft).
8 1 390-1271 Wiper Seal Before assembly, apply Loctite 648 to the wiper seal groove.
Lubricate lightly with lubricant that is being sealed.
9 6 101-3672 Bolt Torque to 3100 350 N m (2286 258 lb ft).