CRANKSHAFT BEARING REPLACEMENT GROUPS 7M3864 - Caterpillar

Engine (1), fuel tank (2) and attachment (3). Operator's compartment (4), hydraulic tank (5), radiator (6), transmission (7), and battery (8). Basic machine shipping specifications are listed below. Rated Bucket Loads and Capacities
The following information is for standard machine configuration with the lift arms straight out (level) and the bucket is fully racked back. The bucket is nominally heaped. 4E2474Rated load 2614 kg (5751 lb) - rated capacity 1.7 cu m (5.6 cu ft). 9V8954Rated load 2642 kg (5812 lb) - rated capacity 1.5 cu m (4.9 cu ft). 9V8959Rated load 2680 kg (5896 lb) - rated capacity 1.3 cu m (4.3 cu ft). 106-7189Rated load 2893 kg (6365 lb) - rated capacity 1.7 cu m (5.6 cu ft).Rated Load for the Material Handling Arm
The following rated loads are with the material handling arm raised to a height above ground 1607 mm (63 in) 9V1795Position (1) - Extension Distance-3.25 m (10.6 ft)Rated Load - 1575 kg (3465 lb).Position (2) - Extension Dimension-4.25 m (13.9 ft)Rated Load - 1245 kg (2739 lb).Position (3) - Extension Dimension-5.25 m (17.2 ft)Rated Load - 1031 kg (2268 lb).Rated Load for the Fork Carriage
6W8832The rated load is determined at standard machine configurations.With the fork tines level at a height of 836 mm (33 in) from the ground (1) and the fork load center distance (2) at 500 mm (19 in).The above data indicates a rated load of 3337 kg (7341 lb) on the fork carriage.