CRANKSHAFT 7M4671 - Caterpillar

Illustration 1 g01207288
Install bearing cup (29).
Illustration 2 g01207286
Install retaining ring (27).
Use Tooling (A) in order to install lip seal (28).
Illustration 3 g01207624
Raise the temperature of bearing cone (26).
Install bearing cone (26) onto shaft (25).
Illustration 4 g01207285
Install shaft (25) and swashplate (24).
Illustration 5 g03670388
Illustration 6 g01207284
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install shim (21), spring (22), and shim (23).
Use Tooling (A) in order to install retaining ring (19).
Illustration 7 g01207282
Install pins (18).
Illustration 8 g01207281
Install bearing (17).
Install pistons (15) and retainer (16).
Illustration 9 g01207280
Install rotating group (14) and shim (13).
Illustration 10 g01207279
Install bearing cone (12).
Illustration 11 g01207278
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install O-ring seal (11), poppet (10), spring (9), poppet (8), sleeve (7), and plug (6).
Illustration 12 g01207276
Lower the temperature of bearing cup (5).
Install bearing cup (5), port plate (4), and O-ring seal (3).
Illustration 13 g01207275
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install head (2) and bolts (1). End By:
Install the piston motor (hydraulic fan).