CRANKSHAFT 8M4500 - Caterpillar

Remove Right Cylinder Head Assembly
preparatory steps: a) remove right camshaft housingb) remove left turbochargerc) remove oil filter housing1. Drain the cooling system. Drain the fuel filter housing.2. Disconnect governor linkage from governor. Disconnect the safety shutoff control cable from lever. Remove the cable bracket and clip mounting bolts from the channel assembly. Remove the governor control channel assembly. 3. Remove the four exhaust elbow bracket mounting bolts (1) from the right cylinder head. Loosen the four bracket mounting bolts (2) in left cylinder head. Remove the right aftercooler water outlet elbow (3). 4. Remove the governor-to-right aftercooler housing mounting bracket (4). Remove the fuel ratio control sensing line (5). Remove the safety shutoff control mounting brakcet (6). Remove the two fuel injection pump bracket mounting bolts (7). Remove the